2. digital
  3. 187140-186184

Bluesound Node N130

Hi I have replaced my Sonos Connect gen1, to Node N130. The Node can not work properly with coax cable it creates micro pauses and I can see that the display on my Simaudio flashes for one second, what is wrong? No problem on the Connect. I have tried two different cables same result. With optical cable no problem. The Node is connected with Ethernet cable (500Mbps).

Any clues

snipan
lowrider57's avatar
lowrider57
5,396 posts
 

 

https://support1.bluesound.com/hc/en-us/community/posts/4406362800151-Audio-Clock-Trim

 

 

So there is no confusion about the clock trim function, below is a post from TonyW of Bluesound…

”The Audio Clock Trim switch was added to adjust an issue with some specific chipsets of external DACs. If you are hearing noise, dropouts or jitter, please disable Auto Clock Trim.”

12many
224 posts
 

You have probably already done this, but mine was doing this and I unplugged the ethernet and power cable for 5 to 10 min and then re-booted it.  It fixed it.  

rocray's avatar
rocray
1,448 posts
 

I had a very similar issue with my 2i when connected to my Wyred4sound DAC 1 LE. It took me a couple of days to figure out the problem. It was, like others have said,was the Audio Clock Trim.

vthokie83
661 posts
 

Never had any issues with my Node 130 (with added LHY linear power supply), but I did find that USB was the best output....not sure if that is an option for you to try

More to discover