Alpha Core Goertz

Not sure about the Mac equipment but I agree about the usage of the Zobel’s. The set I received are very short, which makes them difficult to install.

I am not using them with my SS equipment but if I add a second set for bi-wiring I wonder?

ozzy

@pops Thiels are a pain (I had a pair once).  I would attach the Zobels to the amp end if using Thiels.

@ozzy I soldered ring terminals to my Zobels to make attaching them a breeze.  You could also use spades.  Easy peasy.  These don't have to be expensive audiophile spades.

I am under the impression that Zobels are required with some amps to prevent them from oscillating and overheating.  I installed my Zobels and played the system all day, periodically measuring the amplifier's heatsink temperatures and recording the results.  I then removed the Zobels and did the same thing.  There was no difference in temps, so I concluded that they were not necessary for my particular amplifier. 

@ketchup I don't believe you need zobel networks with Macs on second thought due primarily to the autoformers.  I installed MI2's on my 501's and they sound great with no problems.

They did send my old Classe amp into oscillation back in the day requiring me to use the RC links which solved the problem.  

And you are correct -  connecting theils especially big ones are a major PITA.

Well after experiencing the Goertz MI-3 Divinity cables, I decided to go Goertz bi-wire.

I just placed my 7 footers up for sale on the gon.

ozzy

Question on the use of the Zobel's.

If I use 2 separate Goertz MI-3 Divinity speaker cables, Should I add the Zobel's at each cable end or will one for both cables be sufficient?

ozzy