How do I switch from Wi-Fi to Ethernet cables?
My Bluesound Node currently receives Wi-Fi, but I'd like to switch to a direct link. I assume that would be with an ethernet cable from the modem to the Bluesound - with possibly a better switch between the two.
The problem is that my modem is in the basement and the Bluesound is on a different floor. There is not a clear path for running cable.
Is there a piece of equipment or technology that I could help in this situation?
I compared a couple of wi-fi set ups from 1, 5,10 feet to the Node 130, and direct cabling with a 1 meter ethernet cable I had laying around.....there was a definite audible benefit to going wired direct. Even more noticeable was upgrading the cable to a Supra Audio Cat 8 and/or an Audioquest Vodka ethernet cable. Do I care that there is no technological reason for that to be true? No. |
Cat 8 Ethernet cables are best, as shielding is part of the specification. I've had success with DbillionDa as they have 4 shielded foiled twisted pair(F/FTP). They are available up 150ft long, so an electrician might be able to help you find a way to get it to your room. |
There is a thing called power line wi-fi adapters, TP-LINK is pioneer and better. Two is needed for one connection, comes in various bandwidth options sizes. Get one pair which more/suitable bandwidth. Moreover performance is defendant on tightness of connecting parts and lesser clutters the better the bandwidth. This method is next best than drawing new Ethernet line, Try in Pre-loved market as it is cheaper and doesn't age.
|
I tried hooking up a Matrix Element M2 tonight in my office to Cat6 a few feet from a 10Gbps switch and there was significant pops and crackles coming thru. Disconnected the cable and used wifi - dead silent. Well at least I actually tried it. Common knowledge ethernet can introduce electrical noise especially in locations with computers and other electrical gear. Google it sometime. Enjoy the popcorn.But I'll have a scotch 🥃
|
If you have cable throughout your house you could run an MOCA ethernet to coax adapter. Had a similar situation of modem on one floor and streamer on another. I had coax running through home so installed MOCA ethernet adapters on each end of coax. Works well. https://worldwidesupply.net/blog/moca-adapters-beginners-guide/ |
