What record cleaner is the most bang for the buck??

I used a VPI 16.5. Then I tried 80KHz ultrasound. The latter made as much difference as the upgrade of a major component, so I cleaned all my records with US. Later, I found that my stylus hadn't worn much - minimal wear at 1000 hours, verified by photomicrograph.

I think a quality US machine is a no brainer, but YMMV.

I prefer ultrasonic cleaning.  Once is enough, after that take reasonable care of the cleaned records and just use a brush if necessary 

I second Spin Clean, It is a great place to start. I've recently upped my game with an ultrasonic cleaner. I modded it so it cleans 8 records at a time. I buy used vinyl from antique stores so cleaning upon arrival home is critical.

I also agree that cleaning this intensely can cause damage. Don't clean for the sake of cleaning.

My process is:

1. Good dry clean with a carbon fiber brush followed by a velvet cleaner. Get all the dust out of the grooves. This can take some time.
2. Ultrasonic clean. I run 30 minutes at 30C.
3. Spin Clean. I use heated water.
4. Pat dry with ShamWows and wipe with Spin Clean cloths
5. Air dry
6. Put away in anti-static sleeves. I use "Invest in Vinyl" brand sleeves, but there are plenty to choose from.

Amazon.com: VEVOR Ultrasonic Vinyl Record Cleaner 6L 40kHz

Also, as a note, when you launder the cloths you use NEVER use fabric softener!

Vileda

I use an Allsop Orbitrac for dirty records, and an Audioquest conductive carbon fiber for light dust. Last stylus cleaner and Stylast applied with an old Discwasher SC-1 for the tip.  The whole kit for well under a century note.  No electricity and little counter space needed.