Xangsane SP-9001AG silver interconnect

Looks interesting, but my radar is up to say the least.  For example, I bought these 5N silver interconnects from LavriCables that, in RCA form (I bought balanced for my HeadFi rig), would be about $185USD for a 1m pair, so to be able to buy a 1m pair of 6N interconnects for $160 has me a little skeptical.  I haven’t compared the AWG of the wire used so that might be some part of it, but my understanding is that 6N silver costs MUCH more than 5N.  I get it — it’s China so things can be done cheaply, but then again, it’s China and things can also be done dishonestly.  Looking forward to thoughts from users.

https://www.lavricables.com/cables/reference-silver-rca-interconnects/

Guys, not willing to create an argument but, the SP-9001Ag seems to be VERY special. I’m not sure ordering the 9003Ag is the right move. Just because it says "6N" doesn’t mean it sounds better. According to the friend who recommended it to me, the 9003 is bound to sound less good because the conductors have an individual shield on top of the external shields common with the 9001. According to him, that additional shield around each conductor is the perfect recipe for reduced dynamics. He knows a thing or two about those things, as he builds tube electronics and high sensitivity speakers for a living. He also compared the 9001Ag to AudioNote AN-VX, AudioNote Sooto, and Neotech Nemoi 1220. According to him, the 9001Ag is much better than AN-VX, better than Neotech 1220, and comes very close to Sooto being just "a tiny bit less fruity and expressive" (his own words).

It should be noted that Neotech 1220 and 9001Ag use a very similar geometry with rectangular conductors.

Not that it wouldn’t be interesting to compare 9001 and 9003, but at the very similar prices, I wouldn’t take a chance and would just go for the 9001. It’s not clear wether one of the two should be superior to the other, maybe different uses, different preferences or the need for an extra layer of shielding in ultra polluted environments for the 9003.

That same friend has also noticed that 9001Ag sounds better for RCA with one square conductor on signal, one on return, shield connected at source end and drain wire cut flush at both ends, than using both square conductors on signal and drain wire on return. I have just sent a mail to Xangsane to ask how the finished cable using 9001Ag they sell on their website is terminated.

@soix your concerns are understandable but I can tell you, each and every guy I know who's tried it have stopped looking for the perfect cable. My friend has been pushing me to try it for almost two years now, but I was reluctant to change my complete cable loom. Eventually curiosity (and the need for better shielded cable) finally got the upper hand and now I just wished I had done it earlier! I have no means to test the purity of the silver they use, but the sound is telling me the 4N claim is most likely true. And, buying the cable in bulk and terminating it yourself is not only very cheap, it also allows you to see how seriously and beautifully it is thought out and built. 

@rolox Yeah, I get it.  What terminations did you use on your bulk cable BTW?  My more pressing question is to @roxy54 where you can supposedly get a 1m pair of 6N silver RCA-terminated interconnects for only $160.  That starts to suspend disbelief to me. 

@rolox @soix ,

I tend to be impulsive, and I'm sure that your friend knows more than I do about the subject rolox. I just made a last minute decision to try the round wire model, and hope that I don;t regret that decision.

Soix, to answer to your question, I ordered it directly from Xangsane. Is it really what they say it is? I don't know; but I'm not betting my life on it, just $160, so we'll se how it sounds.