Transients hurting my ears on hifi solid state amps


I've looked at many discussions on listening fatigue and similar topics, but haven't really found the answer to the specific problem I've been having.

To me, modern higher end solid state amplifiers tend have too much slam or too sharp transients and that ends up hurting my ears even at 60db levels. Even listening to mellow jazz, the piano notes are just uncomfortable to listen to because of the attack.

I currently have Buchardt S300 Mk II speakers, which are not high sensitivity by any stretch, and are rather smooth sounding, but I don't know if they could contribute to the issue somehow?

The worst case regarding amplifiers I tried was the Rogue Sphinx V2, which is 100W hybrid Class D with tube preamp. Another I had at home for an extended period and had an issue with was the Arcam SA20, which should be a relatively smooth sounding amplifier, and it did get a little closer to what I was looking for.

I currently have a Primaluna Dialogue Premium integrated and I'm very happy with it. The amp I tried to replace was a Marantz PM6005, which is also very smooth. Both are under the recommended power rating of the speakers (even though that's relative for a tube amp), so I'm wondering whether that could be part of it.

I listen mostly to vinyl (Graham Slee Reflex M preamp) with some digital too (Denafrips Pontus II). Both are relatively smooth and vinyl, while usually being softer, doesn't solve the issue. 

I'm looking to switch back to solid state (class AB) for various reasons and I was wondering if anybody had had similar experiences and recommendations for amps? Most amps, especially higher end, tend to emphasize the dynamics, punch, agility, etc. and I struggle to find anything that would seem to fit the bill. Tubes seem to do the trick for me, especially with some tube rolling, but not sure where to go with solid state. The budget would be around 2000$.

haskisoundi

I currently have a Primaluna Dialogue Premium integrated and I'm very happy with it.

Are you happy with it, and it does not have the shrillness?

 

The amp I tried to replace was a Marantz PM6005, which is also very smooth. Both are under the recommended power rating of the speakers (even though that's relative for a tube amp), so I'm wondering whether that could be part of it.

Is the Marantz the shrill one?

 

I listen mostly to vinyl (Graham Slee Reflex M preamp) with some digital too (Denafrips Pontus II). Both are relatively smooth and vinyl, while usually being softer, doesn't solve the issue. 

Ok - so digital and vinyl both showing thing the same thing, sort of rules out the digital and vinyl being bad - or they are both equally bad.

 

I'm looking to switch back to solid state (class AB) for various reasons

What are those?

 

… and I was wondering if anybody had had similar experiences and recommendations for amps…

Thanks everyone for the advice. There are indeed a lot of things to look at that could help out, even though I still feel there's something related to air pressure and very fast transients that's particularly bugging my sensitive ears, and that it's coming mainly from the amplifier. I've had 3 amplifiers that were fine (Audio Analogue Puccini SE is the one I haven't mentioned) and two that were not, all other things being equal. But certainly working on the rest might make more amplifiers work for me.

I'll see if I find a picture of my main listening room, it's temporarily not used as such, so I can't take one now. I do have panels in first and second reflection points, as well as some extra panels and bass traps. But I tried the amps mostly in another room, which was less treated, so there might be something to that also.

My interconnects are mostly Morrow Cables. I know they are not the smoothest and especially the ones containing a part of silver could be particularly problematic. But I didn't find that changing them to other interconnects (QED for instance) helped, other than losing a lot of definition and clarity. I will try to find some good cables to try out. I use Isotek Initium and Premier power cables mostly because they're the only ones doing a Swiss version. No power conditioning, just an audiophile power strip without any filtering. The power cords do make the amps have more clarity and rhythm, and I believe the transients are faster with those cables. I did also try with normal cables, but they didn't completely solve the issue. Perhaps I should change my power socket (I'm renting, so wanted to avoid) at home so I could try other power cables, such as the Shunyata.

Thanks for the recommendations again. I would love to try Pass Labs or First Watt amps, and they are on top of my endgame list, but I would like to avoid class A because of the heat and electricity consumption. They are also currently out of my budget unfortunately (ideally max 2000$, perhaps stretching to 3000$). Because of the current use case, an integrated with auto standby would be better than having to manually power on and power off various components (e.g. when watching TV or putting background music). Some other recommendations were also too expensive. But if it's correct as @audioman58 states that moving to higher end amplifiers would help, that would be very positive news.

From the ones listed, Naim is the one closes to my budget and easiest to test around here. Hegel would also be a possibility, even though stretching the budget a bit and I don't like paying for a streamer and a DAC I won't use. Perhaps a used one would make sense as proposed by @curiousjim, even though I'm not sure I need to go as far up the line as H360.

I also checked the Hafler amps, somewhat limited supply here in Europe and I'm not sure I want to go the vintage route for now.

Any recommendations regarding Naim, could the Nait 5SI be ok or should I move up the line or go with an older model?

I feel for you as I have the same problem. I would suggest that it is your hearing. My daughter is an audiologist and she explained it to me. It is a condition called Hyperacusis. If you suffer from this you will find that you are sensitive to certain frequencies which feel like they hurt your ears. It is most common that higher frequencies are the worst offenders. Like you the upper register of the piano (mainly above middle C for me) is a strong offender. My daughter is a pianist and I cannot sit in the same room as she when she plays. Other things that you might find uncomfortable in this register of your hearing are: clanking plates when a dishwasher is unloaded, screaming babies, violins, a nail being hammered in, being in full loud restaurants which have a lot of reflective surfaces etc.

Hyperacusis usually comes on gradually during late middle age, but can come on earlier if you have damaged hearing

Unfortunately there is no cure and it is a sign that your hearing is permanently damaged and needs protecting if you go into anywhere loud. So wear ear protection if you go to gigs. You may also get tinnitus with Hyperacusis, but not always. The good news is that if you protect your ears in loud environments it should not get worse.

Regarding Hi-Fi: I had to sell my Naim gear as it sounded harsh and affected my Hyperacusis. I demoed many solid state amps, front ends and speakers. I ended up with a Vitus amp and DAC - they have a wonderful sound with no hard edges that affect my hearing. Speakers I chose were Boenicke (a Swiss company making very natural sounding speakers). I also recommend Luxman amps, they were very smooth and didn’t affect my ears.

Good luck!

If if you can narrow it down to certain frequencies an equalizer might be the easiest solution. I know it‘s frowned upon by some but compared to trying more and more amps and other gear (which you are otherwise happy with), this might be a step worth taking. There are affordable ones on the market that otherwise don‘t compromise the sound quality.

(I‘m thinking about it myself.)

With solid state  vs tubes tubes take on more even harmonics when there are peaks ,Solid state in theory odd harmonics which are peaks 

that is why Mosfets by character character can be warmer or look at pass labs specs just to see what is in their DNA build to get an idea,  Bipolor shave a bit softer leading edge like vacuum tubes 

my Coda uses all 3 types , no brightness at all and myself sensitive to brightness

also another potential fix. Is a warmer sounding dac, or audio cables 

Cardas is know for a warmer cable in their reflection models , just on Sourse to start.