Speaker Placement and Toe-In

Interesting read. Von schweikert uses a Pink noise tone, Wilson has there own version.

What helps is Identifying the first reflection point  and putting some sort of absorption there.  Good luck

Thanks for the reply.

What I have noticed is having the speakers aiming straight out does flatten the soundstage depth somewhat.

So always the tweaker, I decided to toe them in again (slightly). Now the question is how much, or little is the best? Never ending...

ozzy

Ozzy, thought you had Magico M6's?

Guess that was someone else .....

No, it must be some other "rich guy".

It is amazing that when you really start dialing in the soundstage, just a 1/2" can throw off the center image.

ozzy

Out of curiosity, I just measured my loudspeaker vs listening position and, coincidentally, found it is exactly the same ratio as the OP. It happens to be precisely 1:1 --> the distance between woofer centers and the distance from the drivers’ centerline to listening position. This ratio wasn’t intentional as I hadn’t measured it in that way recently, I was only using preferred positioning based on listening tests.

My toe-in is also the same: none. Speakers disappear with zero toe-in and imaging is optimal, and as toe-in degree increases, even a little bit, their location is more revealed. Center image with my speakers isn’t terribly disrupted by toe-in, but it does compress and overall breadth shrinks.

I'm using Townshend Seismic Bars, and thankfully their felt bottoms are super easy to slide around on my hardwood floor.