High end cartridge

Can report good results with Ortofon MC, Hana and Zyx, with the ZYX R50 Bloom 3 (entry level) being an Eye Opener...

Would recommend all three.

I’m running an SPU Royal N and getting wonderful results but it taken a lot of very fine adjustment to get there. It always has a full bodied sound but except for a very fine rage of VTA and VTF (~3g) gives a somewhat measured pace to the music, good for classical but not rock. Get them right and it gains a real spring to its step and a large scale and deep soundstage, Now it will rock its socks off if you haven’t overtightened the mounting bolts and on my rm the counterweight grub screw. This is all in the context of a Schröder Reference, I don’t know how much applies to other arms. The arm effective mass should be north of 18g and the cartridge itself weighs in at near 16. VPI are rather coy about the mass of their tonearms, at least on the internet.

A cadenza bronze uses the same stylus as the Royal N (and the Winfield, Anna etc), I think I’d take this over a black, I know someone who loved it in the 11g Naim Aro.

Rebuild cost of the Royal N was a bit over 50% of a new cartridge, VPI have a bit of a blind spot when it comes to antiskate (as Rega do with VTA) but setting it too low resulted in a skewed cantilever after a year.

@mijostyn  I thought SoundSmith mostly makes MI (moving iron) cartridges not MM (moving magnet).

+1 on SoundSmith. I have The Voice cartridge and wouldn't have any other. Moving iron cartridges have a lot of the benefits of moving coil (MC) cartridges with the compatibility of moving magnet phono stages. The Voice is very linear and does not impart it's own sound or "flavor".

@slimpikins5 

Good to see you are wed to the Ortofon Sound, I share in this same attraction.

I have a few MM's in storage and do intend on bringing them out for a play time, as I have not heard them with my latest Phonostage.

The MM Cart' AT 20ss you refer to is one I will investigate and learn more about it.

The Replicant 100, Paratrace and Fritz Gyger FG 'S' are all sharing the same form as a Styli, the 100 is seemingly being separated from these other forms not only by name but also by suggesting the 100 has undergone a ulterior polishing treatment.

The Dimensions for the Three Styli are the same and the only variances are the name used for the Styli, the dimension tolerances found in the patent for the form of the Styli, might only be the other difference, maybe?, one Brand offers a very tight tolerance for the dimension used across the supplied styli, but this is not known to me or have I seen this discussed as a potential possibility or as a  fact.

'needlestein' is a Cart' rebuild Service in the USA, who makes their work available to seen, the evidence and customer feedback will show the service offered is quite capable to take on the work if a FG 'S' is on the wish list to be used.    

@brockwired , you are absolutely correct but they do get lumped in with MM cartridges. MI cartridges have a much lower moving mass and generally track better. Linear is a good way to describe The Voice. Given that it is much easier and cheaper to build a SOTA moving magnet (moving iron) phono stage IMHO, most audiophiles would be far better off with one of these than a middle of the road low level phono stage and MC cartridge.