SSI Morrow.
Can one use assymetric wire gauge for speaker cable construction?
Hello,
I am trying to build a DIY speaker cable, but while doing so I have one question that needs to be answered. I am using a cable which is essentialy made up of multuple individually insulated cables of smaller gauge.
So can I use more strands for the positive wire & lesser strands for negative wire, essentially an asymmetric gauge design. But length of both positive & negative wires will be same (and between left & right channel).
Can someone please help me answer this question?
Regards,
Saurabh
- ...
- 18 posts total
The for using assymetric gauge came from the idea that can I use power cables as speaker cables. Ignoring the fact that these are heavier and inflexible compared to speaker wires, shielding on these is much better than ordinary wires & gauge is also pretty thick. So if one can use asymmetic gauge then power cables can be very interesting choice for speaker cables.
Saurabh |
Yes... but why?
You can bundle together into a single conductor multiple differeng gauges into a single larger effective gauge. You can also use 2 different effective gauges for + and - to some degree.
You must ensure each conductor has a safe minimum gauge for the current carrying, and this depends on the length as well as the power and speaker impedance. You could often use 16 gauge for small HT type speakers, but I'd recommend 14 as a minimum. So long as your two conductors are at least 14 gauge you should be OK. |
@audio_phool - The speaker cables I and many others have built use 2 x 16 gauge solid UP-OCC copper wire (or 2 x 14 gauge) for the signal and 1 x 10 gauge Silver plated stranded Mil-Spec wire for the Neutral wire and they sound excellent Here’s a link for DIYer’s on how to make them And here’s what other Audiogon members think of them https://forum.audiogon.com/discussions/duelund-conversion-to-diy-helix-geometry-cabling If you have and questions just post them on the thread above Regards - Steve |
- 18 posts total