Devore 0/96 - Integrated AMP help


Hi everyone,

I am in the process of securing Devore 0/96s with A23 cables.  My source will be an Auralic Vega G2.  I have narrowed my list of integrated amps to some tube and SS (Class A) gear.  I am looking for some help from those that have experienced this speaker and amp combinations.  I am moving from a very transparent system and looking for a little more warmth, musicality, and a system that is more emotionally engaging.

Tube amp potentials:
Leben CS300
Leben CS600
Line Magnetic 845
Maybe a simple SET (Unison Research Simply Italy)

SS Class A potentials:
Pass Labs INT-25
Sugden A21se or Masterclass IA-4

Looking to end my constant desire to make system changes once and for all! LOL
crandell25
@davehg 

Well said as I am a huge fan of the 600x and the o96. I do however find Shindo far from dry but I am also aware that alot of nuances combine to determine sound. Shindo with shindo interconnect or a23 or brand x? Shindo with which pre? Stock or did someone roll somthing in? Stock power cable into a Mr. T or some other power conditioner. I have found that the 600x in the exact same setup as a shindo combo can sound a bit too “wet” although I like both more than almost anything else.
Let me save you some money! Only Leben, Shindo, Air Tight or Kondo (Audio Note) can make your speakers sing! Please don't get Luxman or Accuphase or even Dartzeel for that matter! Gl 😆
@kw6   You'd be shocked how well the Luxman MQ-88uC pairs with O/96's.  And the MQ-300 pairing is stellar - even more so.
"@kw6 You’d be shocked how well the Luxman MQ-88uC pairs with O/96’s. And the MQ-300 pairing is stellar - even more so."

I wonder if @kw6 was referring to the Luxman solid state amplifiers specifically. It’s difficult to imagine why their tube amplifiers (Particularly the MQ series) wouldn’t pair well with the Orangutan/96. I do not doubt that the 4 he recommends are excellent choices.
Charles
@charles1dad and crandell25, the stock Bottlehead offerings are ok out of the box, but they really benefit from substituting higher end pieces. These custom amps are built by one of their lead designers (a friend) who is sourcing some rare iron, and letting me spec the coupling caps and higher end parts. The amp design is not currently from BH’s product offering, so a bit custom, though the preamp (BeePre2) is available - I just specc’d higher end caps and a buffered output, plus upgraded NOS tubes. PM me if interested and I can connect you with him. I’m usually skeptical of custom builds but I compared 3 of his builds to my Leben and was shocked by the performance. It was interesting to compare identical amps where the transformer and caps were different - really huge differences. My build gives all the SET magic but with more flesh and bass slam, something I don’t think about when talking about 300b SETs usually, but clearly they are capable if built properly. Biggest gripe about the BH builds is they cheap out on the cabinets and switch gear, but all of those are easily remedied with custom parts and wood worker friends.
I do like the Leben. - it really does sound very different swapping out various tubes. And it’s built like an heirloom piece.

If I was buying a name brand 300b, the Airtight would be at the top of my list, along with an AudioNote, and some of the Shindos. I wish Leben would do a 300b integrated - I liked my Woo WA5.

@ghasley, I agree the cables and mix make a difference. I think the Leben can sound very saturated in a good way, and even while the Shindo is less “juicy” to my ears, I enjoy it, but I tend to like a sweeter, richer sound even if not technically neutral or accurate. On my Leben I’m using Acoustic Zen Silver Reference RCA and Satori speaker cables, but would like to test out the A23 cables (the dealer used these when I demoed the Leben and O/96 and it was a wonderful pairing).