Another GaN smaller integrated, Technics SU-G30 has everything bar the kitchen sink.

The use of speaker impedance data to perform DSP on any speaker it’s connected to is quite interesting. Wonder how that compares to the more powerful and elegant Devialte expert series, which has that feature for only select speakers?

It really is very interesting.  It is also not that hard to do yourself. The idea in the Technics amps is to correct for the amplifier however, not the speaker or the room.  It won't fix room modes or calibrate your speakers in anyway.  It will only correct for any deviations from flat the amplifier puts out, and, I believe, correct for the minor phase angle changes most Class D amps have in the top end.

It's almost like a feed-forward circuit, and it probably has strict limits in amplitude, maybe less than 1 dB of voltage correction.  If I had a bunch of time I might even try this myself to see how my Class D amps compare before and after.

Yeah, but cracked glass, wonder if it was dropped? I’d be nervous buying something like that see cracked glass.

Yeah but can you imagine if that was it, (no chassis dings on the corners) couple of small scratches and just a replacement glass, these things were around $20k back then. And only if you were someone important, could you get one. (This could be the Emperor of Japans one)🙄

Like these magic Sony Reference ESL’s only for the Emperor of Japan🙄
http://www.thevintageknob.org/sony-SS-R10.html
press the user button for more info

Cheers George

Not roon ready, underpowered, Id' rather go for a Lyngdorf . . .

Yeah, but cracked glass, wonder if it was dropped? I’d be nervous buying something like that see cracked glass.

Besides the cracked glass, the input selector knob is broken off. That unit has gone through some kind of severe trauma!

the input selector knob is broken off.

Didn’t see that, but again no biggie 5 position switch maybe $10-$20 plus labour, at the same time the glass gets replaced, if it works it’s a bargain at around that price. We'll find out same time tomorrow.

I just zoomed in on that broken switch shaft and there’s looks to be enough sticking out still to extend with a short aluminium tube epoxy’d over it and then knob drilled to the same diameter of the tube to fit.

Cheers George