I humbly request that no one bother responding to this guy's companion thread he just started. The first rule at the zoo is don't feed the animals. |
But will he come back to this thread and apologize to Mr. Carr for throwing a tantrum like a middle school girl....
I guess we'll see |
Mr Atmospheres's amps were the best I had on my Vandersteen 4a's back in the day. That was a bi amped loudspeaker with an external electronic crossover. The Atmosphere OTL's smoked Conrad johnson, BAT and Quicksilver which at the time was the only tube gear we had in the store. They could not do bass well though. midrange and highs were magical. I used an Eagle 2a for the subwoofers in the Vandersteens. That amp could do bass. I meant no criticism to him. The guy knows what he is doing. Has been designing great amps for years. Look at my updated post on the Lyra as well. I brought home a new phono preamp and a VPI guru to check the Lyra out. The system ROCKS now. Total musical orgasm. |
As a matter of fact I hope some designer builds a balls to the wall Moving Magnet. Like a 5k dollar moving magnet. I'll buy it. London Reference |
Fremer in that AnalogPlanet review above mis-typed some of the spec info for the Delos, particularly the loading range. Here are the specs directly from the Lyra website: http://www.lyraconnoisseur.com/Products/Products_Analog/Delos/delos3.htmlSpecifications for LYRA DELOS: - Designer : Jonathan Carr
- Builder : Yoshinori Mishima (final build, testing), Akiko Ishiyama (primary build)
- Type : Medium weight, medium compliance, low-impedance moving coil cartridge
- Stylus: Namiki microridge line-contact nude diamond stylus (2.5um x 75um), surface-mounted
- Cantilever system: Solid boron rod with short one-point wire suspension, directly mounted into cartridge body
- Coils: 3-layer deep, 6N high-purity copper, square-shaped high-purity iron former, 6.3ohm self-impedance, 9.5uH inductance
- Output voltage: 0.6mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
- Frequency range: 10Hz ~ 50kHz
- Channel separation: 30dB or better at 1kHz
- Compliance: Approx. 12 x 10-6cm/dyne at 100Hz
- Vertical tracking angle: 20 degrees
- Cartridge body: One-piece machining from solid 6063 aluminum billet, partially non-parallel shaping, body threaded directly for mounting screws
- Cartridge mounting screws: 2.6mm 0.45 pitch JIS standard
- Distance from mounting holes to stylus tip: 9.5mm
- Cartridge weight (without stylus cover): 7.3g
- Recommended tracking force: 1.7g ~ 1.8g (1.75g preferred)
..................................................................................................................... - Recommended load directly into MC phono input: 97.6ohm ~ 806ohm (determine by listening, or follow detailed guidelines in user manual)
.....................................................................................................................
- Recommended load via step-up transformer: 5 ~15ohm (step-up transformer's output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable)
- Recommended tonearms: High-quality pivoted or linear (tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment
----------------------------------------------------------------------------------- I'm no expert here and only just recently upgraded my phono preamp to one that allows a wider range of loading options for my Lyras. I loved what I was hearing before, but love what I hear now far more. Loading really has a lot of impact on the sound as does VTA. The rest are important -- getting the VTF right, for example -- but I've found loading and VTA have the most effect on how the carts sound. |
