TEAC NT-505 impossible connecting to WiFi router o such LAN: help me please?


Hello mates,
I got my NT-505 3 days ago.
It seems to be working correctly but in my opinion all software in not the same level than the device: too aged & often no relevant documentation or support about.
However my big trouble is the NETWORK interface:  since first time I switched on, the NT-505 remains "for ever"  into NET configuring blinking state until it goes in power stand by.
Summarizing:

1. RJ45 cable is ok - tested in several manners
2. the wifi router (1Gb fiber connection) is ok
3. the wifi router ether ports (4) are ok - I checked a bridged LAN configuration too

Testing the NT-505 Ether port It results:

1. the physical level of protocol seems working correctly just on-way: the interface recognizes correctly the bandwidth (Fast ot Giga in my case) end the packet coming from the router are buffered. No packet sent  to the router.

2. At protocol level no ARP session are involved hence impossible retrieve MAC address and trying to do something.


VERY STUPID ISSUES:

1. Being NET board logically split from MAIN board It's need a separate firmware(!!!): how can I upload the NET firmware if, as stated into documentation, I must use the mobile app and It's impossible connecting the device to such LAN?

2. NO menu interface to configure manually the net parameters.

May someone help me (tricks..., recovery sw,..., low level maintance menu...,...) 

Thank you a lot.


silvio66
Having been with Teac NT505 for 2 months. Currently use it as an "all-in-one" solution for Amp (2 sets of Teac AP505 as mono block) & Speakers (Elac 249.2). Everything works perfect and I enjoy it.

Still currently been trying with Roon for 1 week. Can't see any improvement with Roon (default setting). Not sure what is the best set up to enhance capabilities of both Roon and NT505. Please advise.

P.S. Not sure a Teac cg-10m would make it better for my sound system. Still not available for sales in my country.  
Working fine, for me, with the version I got in October. No problems connecting through ethernet, playing DSD files from my network server, Tidal Mqa, etc. Headphone and USB connections work ok. Lumin - ok. Since it fullfills its promise, my attention now is more about, how good does it sound. 
big greg - thanks

how good does it sound? Some folks gauge sq by price... a dual ak4497 dac on paper is nearly impossible to beat IMHO. Of course.. the dual ak4499 could outclass it on paper, but at this level we’re down to splitting hairs and total subjectivity. Anyone being objective would come to the same conclusion.

This nt505 has every component required to compete without the ultra luxury brand names. This thing checks every box I required minus the wanted color screen (see cary audio).

There is no way in heck the cary audio dual ak4497 streaming dac with color screen is worth almost triple the price of this.

I streamed our dsd rips via the oppo205 for a long while.. sounds great, but the nt505 is on another level. I totally understand why industry people reference the ak dacs as warm and velvety vs the ex9038pro being harsh.

My wife calls the nt505 mightymax.

My initial requirements: DSD512 via network (im not interested in assembling yet another pc to stream music whilst having a massive home NAS), Color screen, MQA, dual balanced dac, spotify (for my wife), tidal, qobuz.  Amazon and yahoo music would be a net plus, but unnecessary.  The dsd via network seems to be a difficult feature for whatever reason and very few streaming dacs have it.

I’m not much of a reviewer, but I’m a realist and a professional civil engineer. For me - it is what it is. Minus the hiccup I had being an early adopter with whatever problem the usb/network board acquired ... teac replaced it nearly free and even out of warranty. I can’t complain and this does everything I wanted it to.

I researched OCD style and nearly purchased a pioneer elite streamer from overseas until i stumbled upon the nt505.  After stumbling upon a few other streamers - ifi something with dsd1024, cary audio, etc, etc.. i kept coming back to this nt505.  


As it turns out .. mqa blows (subjective I guess) and the color screen is really unnecessary when using an ipad or smartphone as a controller.

I'd recommend it to anyone.




@love_that_sound Did you ever get the CG-10M?  If so, what are your impressions?
@love_that_sound  - my DSD rips sound much better on the Teac than on my former setup (Logitech Touch as streamer, Tascam DA-3000 as dac). I like my recordings from vinyl better than Tidal master/mqa. Then again, the vinyl played direct sounds even better. Not surprising given the price difference in my system. But the Tascam is so good that I am hard pressed to tell exactly WHY the vinyl direct sounds better. No longer the old "digital" feeling, or not much of it. Not so flat, not so muffled or tunnel-like. Digital has really evolved, and if I didn't have a very good analog chain, maybe I would not have missed anything. I am not sure how much is the Teac's fault, some may be due to limitations of my recorder (DA-3000).