Single driver vs traditional 3 way loudspeakers


What you prefer , single driver , no crossover, full   range  loudspeakers powered by low power SAT  or traditional 2-3 way design ?
128x128bache
OP, I recommend auditioning a pair of Cube Nenuphar’s or Nenuphar Mini’s, they are quite a bit better than other full range speakers imo and better than any other speaker I’ve heard with crossovers, including speakers costing considerably more. They need to be used within an appropriate system of course to hear them at their best and I suggest reading David’s thread on AG about the Nenuphar’s to get more information.
I have a pair of vintage Tannoy Gold IIILZG 10", recapped they are beautiful and I don't miss bass with the right source and setup. I also have a pair of Audio Nirvana Classic 10" (50hz to 20K)
(https://commonsenseaudio.com/ ) being built into their own floor standing cabs. I run a single end class A 6wpc tube amp,so I need the sensitivity. With 2 ways, unless you have good power and a high quality tweeter that isn't harsh you loose a lot of detail. To me the full range sounds natural and detailed, good air and sweet highs and decent bass with the right  setup. Their more prone to placement but I much prefer them over 2 way. If you haven't had much experience with them I highly recommend giving them a try! 
Back in the sixties and possibly into the mid seventies, JBL and Stephens-Trusonic produced what they called extended range or full range drivers.  Both used an aluminum dust cap for the mids and some of the lower highs.  For optimum performance, they were designed to mate with a tweeter, but on their own they still sounded very good.  No x-overs, not even a capacitor.  I believe there were 8,12,and 15 inch versions.  They come up on E-bay occasionally, but the aluminum dust caps are often dented.  I once had a pair of the Stephens 8 inch variant, and it was a very well made speaker.
@bache wrote: " What Bache audio ultimately gravitated towards was the so-called “augmented wide-band” (AWB) speaker, which uses a single wide-band driver that covers a large portion of the audible frequency band accompanied by several of what he calls “helper” drivers, in this case a super tweeter and one or more woofers. " 

I have neither affiliation nor experience with Bache loudspeakers, but imo they are making excellent design choices.

Duke
@audiokinesis  Thanks very much, i  got the long way and spend  a lot of time . i  did not make a lot of sale , but all my customer is happy. i open show room  for public in Brooklyn NY, also my customers in Long Island and  PA,