Power Cord Suggestions REF 5se


Just got a recently purchased ARC REF5se back from the shop and really got to hear it for the first time. The output caps were replaced, due to a long story for another time. Anyway, it is fixed and working correctly. At the end of the first night I came to notice that the high end was a little....fatiguing after several hours. I suspect that some is due to the need of the caps to burn-in, could some perhaps be due to the factory pc?

I am currently thinking about a replacement pc and would like to get some suggestions from guys familiar with the 5se. I am running Pass 260.8 with it and had been using a LS27 before getting the 5se and the top end was not nearly as fatiguing.

As it is a 20a plug and I do not have any on hand to swap and try I am hoping someone has already gone through the task. As I am convinced that pc make a difference, I am looking for a couple of names that I should investigate and for a pc I think used is fine, as it will also limit the downside should it not mate well in my system.

I have spent hours looking and researching a half dozen so far, with literally hundreds more to go. I am hoping for a short list of cable manufacturers/models to keep an eye out for.

BTW-I would like to stay away for a discussion about the validity of cables, I am a believer so if you are not, that's fine. Let's take it from there.

SteveA
128x128stevea11757
You could use the PC you had on your LS27 and just change out the plug to a Furutech FI-32R 20A if you like that cord.

I like WyWires. If that’s not a brand you’ve researched it, might be worth a look. 
I thought about that, but the 27 is going to second system to replace a 17se. I have heard of them, never really checked them out, but will now.
The factory cord is quite good, when I bought my 5SE ARC was using SAIN at shows, not sure what they use now...
I bought a big MIT and it closed down image in my system. A better 6550 and breakin needed before you go spend a bunch of $ chasing dragons, and the 5se takes a very very long time to settle in... like 300 hours
Unfortunately, I do not believe the pc I got with the unit is OEM. First owner bought as demo unit. Guy at repair shop had a factory that looked a lot heavier than the cord I got with the unit. Sent email to seller and asked, but I expect his reply to be that is what he got with it, but I guess I will see when he replies.