Power Cord Suggestions REF 5se


Just got a recently purchased ARC REF5se back from the shop and really got to hear it for the first time. The output caps were replaced, due to a long story for another time. Anyway, it is fixed and working correctly. At the end of the first night I came to notice that the high end was a little....fatiguing after several hours. I suspect that some is due to the need of the caps to burn-in, could some perhaps be due to the factory pc?

I am currently thinking about a replacement pc and would like to get some suggestions from guys familiar with the 5se. I am running Pass 260.8 with it and had been using a LS27 before getting the 5se and the top end was not nearly as fatiguing.

As it is a 20a plug and I do not have any on hand to swap and try I am hoping someone has already gone through the task. As I am convinced that pc make a difference, I am looking for a couple of names that I should investigate and for a pc I think used is fine, as it will also limit the downside should it not mate well in my system.

I have spent hours looking and researching a half dozen so far, with literally hundreds more to go. I am hoping for a short list of cable manufacturers/models to keep an eye out for.

BTW-I would like to stay away for a discussion about the validity of cables, I am a believer so if you are not, that's fine. Let's take it from there.

SteveA
stevea11757

Showing 6 responses by stevea11757

As a follow-up, I ordered the Pure Current from Chris the other day, he said at the time it is 2/3 weeks out. So in a short time I will know the improvement. Thank you all for your input, and sorry it took so long, but obviously there have been other outside factors 
Unfortunately, I do not believe the pc I got with the unit is OEM. First owner bought as demo unit. Guy at repair shop had a factory that looked a lot heavier than the cord I got with the unit. Sent email to seller and asked, but I expect his reply to be that is what he got with it, but I guess I will see when he replies.
I thought about that, but the 27 is going to second system to replace a 17se. I have heard of them, never really checked them out, but will now.
audphile1

Yeah, that was pretty much what I was going to do before making any changes. I have a PSA P20 that is currently out of the system, so right now everything is plugged directly into outlets.

Rest of system is PSA DSD, PSA Memory Player, Nak CR7A and Magnum Dynalab 809 going to a set of Shahinian Hawks. As far as ic's, most are straightwire virtuoso (pre to amp) and cardas clear (DAC to pre)
Yes, caps are OEM, just like the ones that were in the unit. Only have 10 hours or so on new caps, rest of unit has around 800+ (at last look)

I will sit on my hands until I get to around 200 hours then make a decision on where to go. I already have a bucket full of 15a, not wanting to go through that again... 

It has somewhat but due to work schedule I am pretty sure it still had less than 100 hours on it. This weekend I might get another 10 hours or so, will make an effort to work it this week after I get home each night so maybe by next weekend I will have a better idea. It has already tamed the hf so I am heading in the right direction.