BEST INTERCONNECT FOR $25 EACH?

Thanks guys. I will check them out Taww. Also, the President of Parts Connexion answered me and said that I don’t even need Shielded cables for a short interconnect application for signals. 

Now I am back to thinking about those Duelunds. Sorry, this is a work in progress as you guys steer me. He also recommended 20awg over the 16awg for the interconnects. 

By the way everybody my speakers are Monitor Audio Gold and my speaker wires are 12AWG Phantom Speaker Cables rated for FT-4 in wall use from Infinite Cables in Canada.  Check out the number of strands! 

There are no $25 best interconnect cables. As a rule of thumb, if your components are under $1000, Decent cables such as from Monoprice work fine, and you don't need more expensive cables, or even a $3000 cable doesn't make any difference. If you components are between $1000 and $10,000, Blue Jean cables work fine. BJC uses Belden and Canare cables, Neutrik and Switchcraft connectors, and a few others. If your components are more than $10,000, then look for better cables. The total cost of your cable is no more than 5% of your system. I make my own cables for a $50K McIntosh-Focal system.

"While any premium microphone cable will serve, I would stick with Mogami 2534. If you are terminating with RCA connectors, connect both the blue wires to the centre pins, both white wires to the outer rings (or vice versa). Connect the shield to the outer ring at the amplifier end only."

terry9

It's always been my understanding that the shield/drain is only connected to the sending end of the cable, so with a preamp/power amp connection, that would be preamp end only.

The mogami 2549 sound really good, you won’t be disappointed, just put on nice connectors and your set.