Marantz AV8003 Processor


I've just received my new processor for 4 days now. After reading previous reviews, the Michael Fremer one really scared me away from the processor because of the perceived difficulties in switching inputs and a difficult remote.
I can assure everyone that inputs are easy to switch. every input is linked directly to a number. The remote's backlight can be set up to a minute. Setting personal input names and links to hdmi, coax etc can b e a little confounding but I figured everything out under an hour and half. Sound quality is good but I have yet to set the EQ with the mic. Sound is not quite as transparent as my Simaudio Attraction 7.1 but blue ray playback with the new sound formats are fantastic. Hope this will help.
anwill
It really depends on the particular player whether all the outputs are simultaneously active or not.

Kal
After writing the 1/3 post, I tried switching the input at the Cinema 11a from HDMI to XLR, but could not obtain a signal with XLR. IIRC, when I first set the 11a up, I was able to make such a switch. But I've made a lot of changes since then, so I may have set up the Cinema 11a in some way that doesn't permit analog from that input, although another input takes analog output from the phono stage without a problem. I'm going to be changing the racks around, so I'll check it out then -- I may have switched something on the Sony XA5400ES. I was too glib about my ease of switching between HDMI and XLR.

db
what was thread about again?

I think its about why its taking Andy Pettitte so long to decide if he is pitching or retired .
Hi, I have an issue with playing 5.1 content from an HDMI input when there is no HDMI output connected. My av8003 only plays left and right channels when no OUTPUT HDMI is connected to my tv, but when the TV is connected via the HDMI OUTPUT then it recognizes the 5.1 properly.

Is this the way it works or can it be changed??

Thank you,
Carlos