2. analog
  3. 1331611379

Why is my Nottingham picking up so much dust noise

Why is my Nottingham picking up so much dust noise? It never did that before. Records would play clean through without any trouble. Now it clicks , pops and burps. I look at the record for signs of trouble and there's nothing there. Clean a new record on my VPI cleaning machine and it still pops. What Gives?
128x128zeal
6 responses Add your response
zeal's avatar
zeal OP
174 posts
 
I was told it could be a grounding problem.
rodman99999
6,130 posts
 
It could be static electricity, going to ground through the cartridge. Does your HVAC system remove a lot of humidity from your home's air?
jmcgrogan2's avatar
jmcgrogan2
6,346 posts
 
Check to make sure your turntable AND tonearm are properly grounded and that one of the grounds didn't come loose.
zeal's avatar
zeal OP
174 posts
 
Rodman,

Yes, my steam heaters take all the humidity away. But I have a static buster and use it all the time.


The table tonearms are grounded but I might need to ground the table to the phono pre amp.
inna
7,296 posts
 
I would also check the cartridge. Can the cause of this be there? Just asking those who know more than I do.
jmcgrogan2's avatar
jmcgrogan2
6,346 posts
 
Yes, the table NEEDS to be grounded too. Run a ground wire from the center hub which holds the bearing. The needle running through the grooves creates static electricity, grounding the table gives this energy a path to go so it doesn't use the cantilever as a path. This should resolve your problem
Log in to respond
More to discover
80x80
Rega Planar 8 (P8) with Apheta 3
80x80
Lenco Reference MKI
80x80
ZYX Ultimate Exceed Airy