why expensive streamers


@soix and others

I am unclear about the effect on sound of streamers (prior to getting to the dac). Audio (even hi-res) has so little information content relative to the mega and giga bit communication and processing speeds (bandwidth, BW) and cheap buffering supported by modern electronics that it seems that any relatively cheap piece of electronics would never lose an audio bit. 

Here is why. Because of the huge amount of BW relative to the BW needs of audio, you can send the same audio chunk 100 times and use a bit checking algorithm (they call this "check sum") to make sure just one of these sets is correct. With this approach you would be assured that the correct bits would be transfered. This high accuracy rate would mean perfect audio bit transfer. 

What am I missing? Why are people spending 1000's on streamers?

thx

 

128x128Ag insider logo xs@2xdelmatae

@12many 

Not sure what your dac is, but any differences you hear may have to do with different processing.  The N150 definitely reclocks, for example.  In addition, if the n150 is upsampling, but the Node isn’t, you’ll definitely hear a difference.  May not matter to you, since you like it better, but for purposes of lessons learned, it’s important to filter out (pun intended) any differences in processing going on.  

 

mdalton

316 posts

@12many

Not sure what your dac is, but any differences you hear may have to do with different processing. The N150 definitely reclocks, for example. In addition, if the n150 is upsampling, but the Node isn’t, you’ll definitely hear a difference. May not matter to you, since you like it better, but for purposes of lessons learned, it’s important to filter out (pun intended) any differences in processing going on.


Yes. And that in more layman terms means to compare the Node to the N150 is to compare two different tools - it might feel like a fruitful comparison, as it’s one of apples to oranges 😉

I too appreciate the wife-was-stunned-by-the-diff factor. But if it’s after a spouse was known to be fidgeting with kit, that’s just another likely expression of bias. Clever Hans was an instructive fellow.

No one seems to have an answer as to why data centers aren’t meaningful sources of perceptible signal degradation for music streaming services. Are all data centers imagined to be of equivalent quality and capability in a world where one streamer company can engineer several tiered devices that make sound remarkably different on the other end of the chain, based on whatever departs any given data center worldwide?

 

@mdalton I understand what you are saying. I don’t have all the answers. My bias was that the N150 would sound the same for all the reasons expressed and that was my technical opinion as well. Beyond that I did not want to spend the extra money for the N150. I liked my node and its software. In spite of that, it sounded better. If it is the different processing that occurs, that processing is part of the product that sounds better so I am keeping the one that sounds better. Maybe I could have bought a $2000 streamer that sounded just as good, but you would still say I got fleeced. Not sure where to draw the line between a fair price and fleecing. I think the Wiim can be had for $100.  The extra cost also goes to product reliability, personal support services, software updates, and additional features.  I find these aspects valuable.  

I wish there was more technical research on this topic because streamers sound different and if we knew why, then that knowledge might lead to other improvements.

What has been your experience when comparing streamers like the Node to something in the Aurender lineup?

@12many 

The only Bluesound product I have is their Powernode, which drives my outdoor speakers on the deck; I’m using the internal DAC cuz it’s obviously about as far as you can get from a critical listening environment.  The Aurenders I’ve heard, because they’re ubiquitous these days, are all in dealer or show conditions, and have never been in A/B situations.  My A/B experience is among my current crop of streamers, which include a Raspberry Pi, an iFi Zen, a Pro-Ject Streambox S2 Ultra, and the streamer portion of my Gold Note DS10.  My experience is consistent with what the data and theory tell me, which is that I hear no difference between a $150 streamer and a $1000 streamer, with my DACs.  

At the high end, I spent an afternoon with a friend at a dealer comparing an Innuos Pulsar ($8000) to the streaming portion of a Simaudio 280D streaming dac ($3900), with a DCS dac.  No difference.  (This experiment was for my friend’s benefit, as he wanted to get comfortable with replacing his DCS with one of the new Simaudio North products - he chose the top of the line 891 - $25k!!)

All of this is consistent with the lab measurements that paul miller at hifi news has been doing on streamers.  I’ve put together a spreadsheet (sorry, I’m a recently retired finance guy) summarizing his results for a bunch of products, including Volumio Rivo (£1k), Aurender N200 (£7k), Melco N20 (£7k), Grimm MU1 (£10k), Aurender N30SA (£24k), and an Antipodes Oladra (£25k).  He compared the SNR and jitter results from these streamers in conjunction with 3 different DACs - AQ Dragonfly, iFi Neo iDSD, and a Mytek Brooklyn (i.e., from really cheap to moderate price, but nothing expensive).  His findings?  Jitter measurements for the $200 Dragonfly ranged from 105 psec to 150 psec, with the highest number coming from the Aurender N200.  Fear not though.  Remember, a psec = 1/1000 nsec, and the general rule is that we can’t detect jitter unless it’s about 30 nsec, which is 30,000 psec!

What about the iFi and the Mytek?  Even better jitter rejection, with ranges of 9-18 psec and 5-10 psec, respectively.  And the results on SNR tests were similar.  There, the only material noise issue was with the Dragonfly.  

In summary, the science, my experience, and actual measurements tell me the same thing.  A competent streamer should not be a source of audible noise; I am convinced that any differences we hear are either due to differences in signal processing (e.g., reclocking, up sampling, etc.), our DACs, or, yes, confirmation bias.  I also believe that most of the niche companies in the streamer space like to bundle their products - server, streamer, dac - because then it’s awfully difficult to pinpoint where that great sound you’re hearing is coming from.

I hope this is helpful.  I’d be happy to give a better, more comprehensive summary of the hifi news methodology, but in the interest of brevity (lol!!)….

 

 

 

@mdalton 

Like others, I cannot explain why you didn’t perceive differences. I already know you can explain why i do - you believe it confirmation bias. I have explored that in depth as I’m quite aware of that tendency in my own line of work so I try pretty hard to not fall into that trap and so I don’t think that is what’s happening. For instance, I’ve listened to a lot of quite pricey gear (amps, DACs, cables) in home which I’ve returned because even if I could perceive a difference - it wasn’t enough to merit opening my wallet. I’ve spent only when I felt it merited it.

I took my streamer (some would say high end - others mid range at >$5k) to my local dealer (who’s now looking to consider the brand). I first auditioned his Simaudio 680 DAC using their built in Mind2 module. Then we played the same track sourced from my streamer (via USB input on the DAC). He was surprised at how much better it was than the onboard module. I was actually hoping to sell my unit and reduce boxes. My bias (strong) was to favor the 680 as DAC w/ streamer. I came away disappointed and kept my streamer and went another direction w/ the DAC.

Yes, bits are bits. The data arrives fully intact. I will not dispute that. But the data is delivered in an analogue wave form with a slope to the rise and fall which affect when those 1 and 0s are registered (jitter). And, noise (not hiss) is carried along for the ride - affecting the same. 

Are differences night and day? Some would say yes. I would say no. But, for those of us pursuing higher performance, they were perceptible - and valuable. I perceive more spatial information (openness and depth as opposed to a flat soundstage). Tonally they are essentially the same. But, depth is significantly better w/ the better streamers. 

By the way, I had also auditioned the Bluesound Node 2i and Lumin mini streamers going into the Marantz reference player/DAC. I heard very little difference between those two unit against each other, and only minor differences between them and the Aurender N100H I owned at the time. Things have progressed since then and I’m comfortable w/ where I’ve spent - and not. I suspect others feel the same.

Perhaps you should ask one of the better companies out there to explain why there are differences. You might come away confident in your current position. Or, you might begin to wonder if you’re missing something. Let us know what you find.