2. digital
  3. 1417629283

USB to I2S that supports DSD

I've looked and looked and can't find an outboard box that converts USB to I2S and supports DSD, or an PC internal sound card that outputs I2S and supports DSD. Maybe I'm just blind, dumb, and deaf.

I just came close to purchasing the Pink Faun I2S bridge, but then realized it doesn't support DSD out, which would mean JRiver needs to step the stream down - rather not do that. PFaun also has a FAQ that dis's the whole dsd format, and then says later versions might support it.

My digital setup is a good quiet PC with USB out to the Wyred DAC2 DSDse. (Yes, I know a dedicated server would be better). I figure it's now time to take advantage of the I2S input to the Dac. But, there doesn't seem to be any solution for this in either an outboard converter (which should be superior by avoiding PC noise) or an internal sound card.

I see the Amanero Technologies card, but it would require me to build a box for it - seems like someone ought to have done this by now. There's the Off-Ramp 5, but like the PFaun, it's limited to 24/192.

Any help out there?
poonbean
11 responses Add your response
rrsclyde
84 posts
 
I believe the Audiobyte Hydra-X does this. I have one, which I really like, but I'm not using it currently (my DAC doesn't support DSD on anything but its USB input), but it is not for sale.

Best,

Randy
peter_s
1,335 posts
 
I've heard that the USB input is quite good on the W4S. For redbook recordings, I've heard some say that converting USB to I2S (using an Empirical Audio Offramp 5) is no longer needed (might require FEMTO Clock - does yours have one - upgrade cost is $300). You might want to look into that before going to I2S. If you do go to I2S, let us know how it works out.
audioengr
3,282 posts
 
Off-Ramp 6 when available will support DSD with I2S output, both RJ-45 and HDMI connectors. It is still in debug. No ETA yet.

BTW, I also have network renderer with the same DSD outputs in design.

Steve N.
Empirical Audio
poonbean OP
44 posts
 
Yup- that audiobyte hydra x seems like the only one out there right now. Thanks for the tip!! With Empirical on the way, it appears the mfgrs have seen this niche arrive. I'm guessing that going with an outboard converter is the way to go. So then it might mean installing the SOtM USB card and power filter to improve what leaves the pc. Anyone with experience doing this?

Actually getting the femto installed right now- hopefully it makes a difference. And the USB from the w4s dac is good, but it's ckear there's room for improvement.
Post removed 
poonbean OP
44 posts
 
Well, I've borrowed a friend's server with I2S out, and compared with analogue. Both are superior to the USB connection, such as providing more harmonic depth, more "air", less grain, tighter imaging - overall a bit more musical.

Plus, avoiding the additional processing required to convert the USB signal back to I2S format just makes sense to me and others.
Post removed 
sruffle
57 posts
 
The Gustard U12 looks like it does this. It is cheap and has received positive comments on the head-fi forum. I can't vouch for it but I am curious if the I2S output is good. For $150 to $200, it may be worth a try.
Post removed 
poonbean OP
44 posts
 
In speaking with W4S today, they remain enamored with the USB especially with the Femto clock - which should be back in my system end of next week. Their advice was to not go the outboard usb to i2s converter route just to avoid more processing and boxes and connections along the signal path. And, at the moment there still is not a good i2s pc card out there that can handle the dsd bit depth. Further, W4S did not seem to think that i2s into the w4s would be significantly better than the usb, if at all, which seems a bit surprising.

At this point, I think I'll switch gears and consider simply improving the USB output from the pc itself. Right now, it's simply usb off the motherboard. Perhaps the SOtM card with their fan and power supply tweaks. Has anyone tried these?
Post removed 
Log in to respond
More to discover
80x80
Meitner Audio MA3
80x80
Prism Sound Callia
80x80
Mytek Empire Streamer