2. digital
  3. 1417629283

USB to I2S that supports DSD

I've looked and looked and can't find an outboard box that converts USB to I2S and supports DSD, or an PC internal sound card that outputs I2S and supports DSD. Maybe I'm just blind, dumb, and deaf.

I just came close to purchasing the Pink Faun I2S bridge, but then realized it doesn't support DSD out, which would mean JRiver needs to step the stream down - rather not do that. PFaun also has a FAQ that dis's the whole dsd format, and then says later versions might support it.

My digital setup is a good quiet PC with USB out to the Wyred DAC2 DSDse. (Yes, I know a dedicated server would be better). I figure it's now time to take advantage of the I2S input to the Dac. But, there doesn't seem to be any solution for this in either an outboard converter (which should be superior by avoiding PC noise) or an internal sound card.

I see the Amanero Technologies card, but it would require me to build a box for it - seems like someone ought to have done this by now. There's the Off-Ramp 5, but like the PFaun, it's limited to 24/192.

Any help out there?
poonbean

Showing 3 responses by poonbean

poonbean OP
45 posts
 
Yup- that audiobyte hydra x seems like the only one out there right now. Thanks for the tip!! With Empirical on the way, it appears the mfgrs have seen this niche arrive. I'm guessing that going with an outboard converter is the way to go. So then it might mean installing the SOtM USB card and power filter to improve what leaves the pc. Anyone with experience doing this?

Actually getting the femto installed right now- hopefully it makes a difference. And the USB from the w4s dac is good, but it's ckear there's room for improvement.
poonbean OP
45 posts
 
Well, I've borrowed a friend's server with I2S out, and compared with analogue. Both are superior to the USB connection, such as providing more harmonic depth, more "air", less grain, tighter imaging - overall a bit more musical.

Plus, avoiding the additional processing required to convert the USB signal back to I2S format just makes sense to me and others.
poonbean OP
45 posts
 
In speaking with W4S today, they remain enamored with the USB especially with the Femto clock - which should be back in my system end of next week. Their advice was to not go the outboard usb to i2s converter route just to avoid more processing and boxes and connections along the signal path. And, at the moment there still is not a good i2s pc card out there that can handle the dsd bit depth. Further, W4S did not seem to think that i2s into the w4s would be significantly better than the usb, if at all, which seems a bit surprising.

At this point, I think I'll switch gears and consider simply improving the USB output from the pc itself. Right now, it's simply usb off the motherboard. Perhaps the SOtM card with their fan and power supply tweaks. Has anyone tried these?
More to discover