Upgrading from Primaluna


Recently went down the front end upgrade path and am running a nice table and phono now. I'm curious as to what the weaker link in my system is between my Primaluna Dialogue Premium Preamp and my Dialogue Premium Hp Power Amp. I'm considering swapping out the amp to a Ps Audio BHK250 for the summer to avoid heat, but am curious if I would be better off dealing with the heat and moving up to say an Allnic L-7000/Arc Ref 3 for the Pre. I'm happy with tubes on the front end, but curious if I'm running out of gas with 88DB efficient speakers and a single chassis tube amp. Which amp would you upgrade first and what benefits would you expect?

128x128j-wall

@larry5729. Sound quality… the way music comes through… more technically midrange bloom as well as rhythm and pace.

With your 88db speakers you'll be hard pushed to get a decent upgrade over PL Dialogue HP. With tube amps you need to spend at least double if not triple the amount to hear real improvement with those speakers. SS amps at similar price class are almost all dry and sterile sounding in comparison in my experience - don't get me wrong, they are perfect, but they just do not excite nor provoke you to listen as the tube PL does. There's an extra level and dimension in that tube sound, SS amps just don't hit that spot, at least in this price range.

 

I also have 85db sensitive speakers so I share the dilemma. Thus I'd recommend another option not covered here (albeit a controversial one but I'll exmplain this below): modify your Dialogue Premium HP.

PLs are indeed well designed amps for the money, for 98% of the cases I wouldn't touch it and wouldn't recommend touching it. But for those those 2% who look for the very perfecrtion there are certain weaknesses that you can exploit to max out their design to fuller potential. With customized tubes you can do a lot improvements, but internally PLs main weakness are the coupling and power tube caps. I recapped mine with coupling V-Caps TFTF. Not cheap, mind. And takes ages to run-in (V-Cap measurements say around 1000 hours to full burn-in , but I noticed considerable improvement around 200-300 hour mark already).

If you have the dosh, consider also the powertube caps converted to V-Caps. There's enough room to fit those lardy caps. Those will be considerable improvement over stock DuRoch caps. I didn't have enough and went for Jupiter Copper Foil caps for power tubes instead.

Those Jupiter Copper Foil & Wax caps are controversial since some people rave about their sound, yet those who have measured them in detail tend to be dissapointed (small distortions measured). IMHO Jupiter cap stands where psychoacoustic hearing preference is set above measurements, hence they have their subtle speciefic sound character, you may like or may not. After nearly a year living with them, I got to say I love their sonics to bits!

After this recap mod and burn-in my HP Integrated took another sonic level and IMHO rivalling amps at a much higher price class. The sonic finesse really impresses me the more I listen and the more I adore the sound. Now I have no plan to sell it, at least within 10 year perspective, unless I find something staggeringly better at this price class among tube amps, which I doubt. So my HP  now is probably a lifetime keeper.

 

So maybe this HP mod route is worth considering for you as well.

 

Just me 2c,

Margus

Keep the PL absolutely. Try the KT150 tubes. Another world. More punch, more bass and delicious High. 

@j-wall Very nice system!

Changing the amps will change the sound, you can definitely try that! Audio Research Ref line is top notch stuff and the odds are there will be a good improvement sonically by switching to ARC Ref series components.

But…the room acoustics and speaker placement is something you will run into no matter what preamp or amp you are using.
I don’t know what what you mean by acoustic panels next to the speakers. What I would recommend is trying the following:

1. Spread the speakers further apart to about 1.5ft or even 1ft from side wall

2. Move the acoustics panels to treat the first reflection points (have panels on the side walls approximately midpoint between you and speakers)

3. Adjust the toe in to get the imaging to your liking. Adjust distance between listening chair to speakers.

4. I would also add bass traps behind the speakers

Suggestions above to move the rack are valid but I would focus on acoustic treatments before making any other changes.

 

@tablejockey @ghdprentice @audphile1 I've uploaded pictures of my acoustic panels I made, that are in the room. I'm unable to hang them on the walls due to renting. If I move the speakers closer to the wall wouldn't it be detrimental having a speaker inches away from the panel? Also, see the storage box on the ground in the one photo? I was attempting not to cause problems with the bass pumping right into that, so that's also why I've moved the speakers out 2 feet from each wall.