Upgrade from VPI HW-19 Mark IV turntable


I have a really good sounding VPI HW-19 Mark 4 table with the SAMA motor, wood body Benz H2 cartridge and a Premier MMT arm (running into an EAR 834P phono stage). Obviously the arm is probably the weak link on this setup. I have had the urge to move on and get a new turntable in the $2,000-$2,500 range (with cartridge). Would a new 'table in this price range be a big step up in sound quality, very little or none at all? I am considering VPI Scout, Music Hall 9.1, Rega's or any other suggestions. Would upgrading the arm be the best bang for the buck? Thanks in advance for your comments.
128x128resophonic
I think a turntable in the 2000 range with arm and cartridge would probably be a step down. I would definitely look into replacing the arm. The Audiomods is a steal for its performance. An SME 309 also works well on your table. Either can be purchased for less than $1500
Keep the Mark IV, it's one of the best turntables VPI ever made. I think you would have to spend way above your budget to get better and any of the models you mention would IMHO, be a backward step.
The Mark IV warrants a much better arm. I once had a Mark III and going from a Rega arm to an SME V made a huge difference.
Maybe look for a used Graham 2.2 ..... even a Mk1 Phantom might be had within your budget as would an SME-V. I've seen Basis Vector arms for sale for about $1500 (I bought one!) and at that price you get a real bargain. Basis arms can be a bit tricky to set up on non Basis turntables however.
The VPI H-19 MkIV is an excellent high value table. There still exist some additional updates that could further improve your table. 1) Sorbothane suspension 2) SDS motor controller, 3) Platter upgrades. As you have already pointed out, a tonearm upgrade would also yield sonic benefits.

Another option would be to sell the table and purchase a used VPI Classic. You have a good table.
Get rid of that MMT arm. I used that with a MK3 before I upgraded to a SME 309,apples and oranges!
I have the same MkIV table with the Eminent Technology linear track air bearing tonearm that I would recommend on any table. I am content that the table is a great value & you would be better off pursuing a tonearm upgrage rather than starting from scratch. My setup isn't going anywhere. For what it's worth, my best upgrade after this purchase was my ARC PH-5 tube phono stage. The veil has lifted!
I concur - keep the MK IV and upgrade the arm, then get an SDS on there and you will have a rig you can hold on to for life.
I hope after two years he has made a decision! If not he must be very cautious consumer!