2. amps-preamps
  3. 190666-180555

Technics MK2 > Pear Audio Blue Integrated Amp

Audiogon Community, 

I'm just wading into the Hi-Fi world and wanted to get some input on my phono set-up.  I'm running a Technics MK2 with a Grado Gold cartridge > Marantz Cinema 70s phono input > Pear Audio Blue (55w p/c) integrated amp (via pure direct Zone 2 output).

I am impressed with the sound stage as it's a dramatic improvement over my previous set up but I am finding that I am really having to crank the volume on the Marantz to get the desired output and appreciate the full spectrum.  Is this normal?  

To me, it doesn't make sense on paper to put another phono stage in line before the Pear as it is integrated but would this be a viable option?  Perhaps wait until I can afford more robust amplification components?  Maybe the Technics is the weak link?

I am using Anti interconnects and Auditorium 23 speaker cables + DeVore Silverback Reference speakers.  Appreciate your takes!

-Mike

mitaliano
Ag insider logo xs@2x
cleeds
5,947 posts
 

It's common for phono to have lower level than line level sources. It's perfectly fine provided your amplifier can be driven to sufficient output.

hoytis
93 posts
 

So are you using the pre-out on the Marantz to connect to the Pear? Maybe just use one or the other to see how it sounds.

mitaliano OP
4 posts
 

correct— going pre out from the Marantz to line in on the Pear. I guess I mistakenly thought that by using Zone 2 out and Pure Direct mode that I was bypassing all signal processing within the Marantz. I think I will try going directly into the phono stage on the Pear and see what kind of results I get. 

if it’s apples to apples, I might take Cleed’s advice and chalk it up to everything being perfectly fine and the output level gap being normal between phono and other components as it’s nice to have the option to adjust the volume remotely. 
 

Thanks to all for your input 

br3098
994 posts
 

Mitaliano, the Pear Audio Blue Integrated amp does not have a built-in phono section. Yes, there are a pair of outputs labeled phono but but there is no phono stage in the box. You will want to use a good tube phono preamp, preferably the Pear Audio RIAA phono or Croft RIAA Phono R phono amps.

mitaliano OP
4 posts
 

that would explain the issue.  I bought the Pear unboxed and assumed as you pointed out that it had an on board phono stage due to the labeled phone inputs. 

as the adage goes...when you assume...  thank you br3098!

More to discover