Hi Annika,
No, the various versions of the Sonus Faber Minima all appear to have efficiencies in the low 80's (Sound Pressure Level in db for a 1 watt input measured at 1 meter), as opposed to the mid to high 90's I had suggested. For example, as noted in these measurements the Minima FM2, while being tube friendly in terms of its impedance characteristics, produces only 82.5 db for a 1 watt input at a 1 meter distance.
A speaker having that kind of efficiency will struggle to reach 90 db at typical listening distances (10 feet or so), when powered with say 20 or 30 watts. Which in turn would be adequate for many and probably most recordings for most listeners, but is likely to be insufficient to handle the brief high volume dynamic peaks, for example on bass drum beats, of recordings having particularly wide dynamic range ("dynamic range" being the DIFFERENCE in volume between the loudest notes and the softest notes). I feel pretty certain that you would ultimately find that to be an issue with enough recordings to make it an unsatisfactory choice.
I'm thinking that a MUCH better choice in that and many other ways, although it is not vintage, and although it would involve importing a speaker from Canada, would be the Coincident Triumph Extreme II. The indicated prices including stands total $3400 when translated into US dollars at current exchange rates.
For amplification, you may want to consider the currently produced Line Magnetic products, particularly their integrated amplifiers. They are manufactured in China, and seem to be VERY highly regarded by reviewers and knowledgeable audiophiles. They would allow you to avoid the condition-related risks and uncertainties of older tube equipment. And although their products tend to be largish, heavy, and substantially built, an integrated amplifier would be space saving in the sense that it would combine preamp and power amp functions into a single component.
As with most modern integrated amplifiers, though, you would need a separate phono stage. The Herron VTPH-2, made in the USA and costing $3650, seems to be raved about by everyone who hears it. And it is sufficiently versatile to be suitable for use with a particularly wide range of cartridge types. Also, by all accounts Mr. Herron is a wonderful person to deal with.
Finally, since the Line Magnetic products are manufactured in China, they presumably are available in a 220V 50Hz configuration. And I note that the description of the Herron indicates that most international voltages are available."
Best of luck as you proceed. Regards,
-- Al
No, the various versions of the Sonus Faber Minima all appear to have efficiencies in the low 80's (Sound Pressure Level in db for a 1 watt input measured at 1 meter), as opposed to the mid to high 90's I had suggested. For example, as noted in these measurements the Minima FM2, while being tube friendly in terms of its impedance characteristics, produces only 82.5 db for a 1 watt input at a 1 meter distance.
A speaker having that kind of efficiency will struggle to reach 90 db at typical listening distances (10 feet or so), when powered with say 20 or 30 watts. Which in turn would be adequate for many and probably most recordings for most listeners, but is likely to be insufficient to handle the brief high volume dynamic peaks, for example on bass drum beats, of recordings having particularly wide dynamic range ("dynamic range" being the DIFFERENCE in volume between the loudest notes and the softest notes). I feel pretty certain that you would ultimately find that to be an issue with enough recordings to make it an unsatisfactory choice.
I'm thinking that a MUCH better choice in that and many other ways, although it is not vintage, and although it would involve importing a speaker from Canada, would be the Coincident Triumph Extreme II. The indicated prices including stands total $3400 when translated into US dollars at current exchange rates.
For amplification, you may want to consider the currently produced Line Magnetic products, particularly their integrated amplifiers. They are manufactured in China, and seem to be VERY highly regarded by reviewers and knowledgeable audiophiles. They would allow you to avoid the condition-related risks and uncertainties of older tube equipment. And although their products tend to be largish, heavy, and substantially built, an integrated amplifier would be space saving in the sense that it would combine preamp and power amp functions into a single component.
As with most modern integrated amplifiers, though, you would need a separate phono stage. The Herron VTPH-2, made in the USA and costing $3650, seems to be raved about by everyone who hears it. And it is sufficiently versatile to be suitable for use with a particularly wide range of cartridge types. Also, by all accounts Mr. Herron is a wonderful person to deal with.
Finally, since the Line Magnetic products are manufactured in China, they presumably are available in a 220V 50Hz configuration. And I note that the description of the Herron indicates that most international voltages are available."
Best of luck as you proceed. Regards,
-- Al