I have wrecked many a loudspeaker and tube filament in exactly this manner. To all reading this thread......proceed with caution!
Room Response
You can't possibly be using the SR transducers in conjunction with the Shakti hologram. The two products are well known to cause destructive quantum hall harmonic interference causing permanent damage to speaker transducers (from paramagnetism) and will bend the filaments in any tubes that happen to be in the room. |
Post removed |
Then I placed a ten-pack of Synergistic Research around the room as directed. Walla, room problems solved. And a partridge in a pear tree. Give me a break, more fuser voodoo from SR, pack of 10 is $500!!!!!!! https://cdn.shopify.com/s/files/1/0577/4029/products/2_0-and-x-632_2048x2048.jpg?v=1486339716 QUOTE SR: " These small transducers, strategically placed in the listening room make a great improvement to the sound. You can treat your room in three stages and beyond that put it on your speakers (stage 4 & 5). The HFT's are very small and very easy to handle. They come in sets of five, a strip of Blue Tek for easy mounting is included. NOW NEW:Officially announcing two new HFTs- HFT 2.0 and HFT X that take the HFT concept to exciting new levels. The HFT 2.0 is a warmer sounding transducer and HFT X has more details and resolution and both are intended to be used in conjunction with the original HFTs. Click the "Setup for HFT 2.0 and HFT X" tab above to see a step by step placement guide for how to install the new HFT 2.0 and HFT-X in your system. The effect of the HFT's in combination with Synergistic's FEQ (Frequency Equalizer) can even be intensified. What they do: Cheers George |
handyman ... Double click on my icon, then double click again and you'll see an expanded picture of my system. The removal of the big glass coffee table improved the bass response and dynamics. Then I placed a ten-pack of Synergistic Research around the room as directed. Walla, room problems solved. https://highend-electronics.com/products/sr-hft-high-frequency-transformer Frank |
@handymann - the best treatments I have applied have been at the upper "layer" of the room... In my old 12 x 15 x 8 room 1. I had an 8ft wide vinly blind behind the listening position - it was only lowered about 15 inches - any lower made no difference 2. I had a sound absorbing panel on top of a book shelf to the right of the listening position - it improved clarity a lot - guess it stopped reflections between the top of the bookshelf and the ceiling 3. the floor was hardwood with a 5 x 8ft rug In my new room I only have the panel on top of the bookshelf. The new room is 16.5 x 40 x 8 ft with dropped sections taking it down to 7 ft - the speaker are 8 ft from the wall behind them and 4.5 ft in from the sides - there is around 24 ft of open space behind the listening position The entire room is carpeted I no longer hear any reflections The image is huge and 3D. I have also applied the vinyl blind treatment at a friends concrete condo with 11 ft ceilings - the improvements were very dramatic. I would focus effort on curbing reflections in the upper level of the room Regards - steve |
Post removed |
I also have a single listening chair (a wood rocker) and I sit fairly close to my Quad ESL's. When I rock in the chair, it affects the listening experience so I've learned to sit still. I was anal retentive about getting the angle on my speakers correct. Also, I have thick wool military blankets on my wood floors and acoustic foam along the sloping side walls. Fortunately, I don't have appliances in my attic listening room with the exception of a window unit air conditioner which remains turned off while listening. I'm finally happy with the sound coming from my stereo but it took some time for me to get there. |