2. digital
  3. 1400501663

Replacing a transport in an Arcam DVD player

I have an Arcam DV79 player and the transport has become unreliable enough that the player is very frustrating to use. The transport, a DSL-710A, is no longer in production and the used ones I can find online cost more than the player is worth.

On the back of the transport are a standard ATAPI connector and a standard four-pin power connector with 12v, 5v and two ground pins.

Since DVD mechanisms are so common, is it possible to substitute a different DVD mechanism, assuming it could be physically fitted and alighned to the plastic bracket that holds the transport mechanism?

Obviously only the playback functionality of a DVD burner would be used but are the controls for that standardized among mechanisms so that plugging it into the Arcam connector would work?

Thanks in advance
128x128sfar
5 responses Add your response
sfar's avatar
sfar OP
1,758 posts
 
Raymonda - appreciate your good wishes.

I agree with you, probably 90% of my playing time is from a hard drive, 9% from mog.com (now beatsmusic.com) and only rarely from a CD. And this is essentially just a backup to another player so I don't really need it, just don't want to dump it if someone can use it. It was a fine player and its stereo analog output is probably better than what you'd get from a modest standalone DAC.
raymonda
855 posts
 
I think that this the most frustrating part when it comes to dvd lasers. So much so, I given up on players of discs all together. It is all hard drives, and back up hard drives for me. That, and vinyl.

Good luck.
Ag insider logo xs@2x
islandmandan
1,260 posts
 
Hope it works out for you, I know it can be frustrating.

Good Luck,
Dan
sfar's avatar
sfar OP
1,758 posts
 
Thanks, Dan. Yes, I've done what I think is an exhaustive search. It is listed at partstore.com but the notation there is that it is no longer available. There are a few on ebay but all are used and are so expensive they don't make sense.

I've even investigated units that have similar part numbers but the configuration of them is different enough that I'm not sure they would work. Some of them are inexpensive enough that I may give it a try, anyway. It's such a great sounding player I hate to put it in the dumpster so I'll keep looking.
Ag insider logo xs@2x
islandmandan
1,260 posts
 
Have you done an adequate search for a replacement? Try partstore.com. Also, there are many suppliers for transports on ebay, I would think somewhere in the world a NOS transport should be available.

Good luck,
Dan
Log in to respond
More to discover
80x80
Denafrips Audio New-Terminator Gen-15
80x80
Naim Audio CD-555
80x80
MSB Technology THE SELECT