I've been through much streaming equipment over around a decade, of the items mentioned by OP, the only one I take issue with is audiophile switch, resulted in diminished sound quality for me. My situation is modem and router in listening room, quality ethernet cable from router to streamer, have JCAT NetXE in my streamer and fiber conversion after for ethernet optimization. Switch becomes redundant with this setup, just adding another component and 2 ethernet cables, keeping streaming chain clean and shortest length possible is the way to go. The other very important issue is clocking, this pays off in a more analog presentation.
network switches and cables.
I’m considering upgrading my network cables and adding an audiophile switch for streaming music from the internet. I may also consider adding a filter system like the Network Acoustics muon pro. I currently use an Innuos Pulsar streamer connected directly from my Comcast cable modem/router using Supra Cat 8 patch cable. I have some questions for those who have incorporated these types of components into your digital front end. Any and all help is greatly appreciated. If you have tried something similar but don’t feel that these types of components are of benefit I would appreciate your experiences as well. If however you are just a denier, I respect your opinion but please respect mine by refraining from posting demeaning comments.
Some of my questions are:
1. What are the best locations to place the filter and switch? I understand that the order from my router is router to switch to filter to streamer. But what are the correct distances between the router, switch, filter and streamer? Equal distance? Switch placed closer to the router? Switch placed closer to the filter? Etc.? Or it doesn’t matter? My modem/router is located in my listening room so I have the option to move the switch and filter around to the desired locations and purchase cable lengths to match.
2. Is the quality of Ethernet cable between each component of equal importance? So for example is the Ethernet cable between router and switch as important as the Ethernet cable between the filter and streamer, etc? If they are not of equal importance, which connection is the more important? Or again, does it matter?
3. Aside from the streamer and DAC, do the switch or filter/cables have the greater impact on streaming sound quality.
I ask the above questions in case finances do not allow for the purchase of all components at the same time. I’d like to be sure that I at least purchase the more important components at the onset.
i have already posed the same questions to network acoustics and I’m awaiting their reply. In the meantime, any help I can get from the forum will again be very much appreciated.
- ...
- 10 posts total
| Post removed |
@jazzman7 @mgrif104 thanks very much to you both. This is exactly the type of feedback that is very helpful to me. @sns although on the other hand I find it interesting that with the modem/router in the same room as the streamer, as is my case (and yours), the switch diminished sound quality (in your system). This more or less brings me back to the question I’ve always had regarding the need for a switch when only one component is hardwired, particularly when you have a quality streamer with quality clocking built-in and a good quality network cable connecting the router to the streamer. What streamer do you use and what switch were you able to eliminate? |
My router and the initial switch in a managed Ubiquity Unifi network is in my office where my Comcast bridged modem resides. A network cable then runs 50 feet to my audio room up through my attic space. I placed a second powered Unifi switch 1 meter from my Network Acoustics Eno filter that is then directly connected to my server. The long exposed run from my initial network switch to the audio room was my main concern for possibly allowing the addition noise to the system so the final switch and filter were placed as close to my server as I could accommodate. My NAS with 7TB of music also resides in my office. |
Re: ethernet cables. I’m very happy with my Sablon 2020. Have 2 of them. Body, texture, air. Re: cable order. I can hear the difference when swapped around. Very subjective as to which is preferable. Re: Network Acoustics. The guys at NA said the Eno filter can be reversed - meaning the in/out can be flipped - which I’ve done with mine. IDK about the Muon Pro. Re: Importance. It all matters - even more so with the digital streaming chain. A weak link will harbor some digititus. A clean system will remove it. No switch in my streaming chain. But it is tricked out with power conditioning, Eno’s, LPS’s - and a modded router. Good luck! |
- 10 posts total