Neg feedback switch

I have a Triode of Japan 300B Amp. It has a on and off negative feed back switch. What purpose does it serve. When it is engaged it seems to lower the volume.

cjaronica06-02-2016 5:10pm

5 responses Add your response

atmasphere Details Discussions Posts This discussion Message User 11,794 posts 06-03-2016 at 03:05pm Copy Comment URL Report Comment Edit Delete It decreases amplifier gain to bring more dynamic headroom. This statement is false. 'Dynamic headroom' is a function of the class of operation (class A, class AB, etc.) and is unaffected by feedback. The amplifier gain is used to reduce the 'output impedance' by using the gain as a servo mechanism to correct for errors in the output signal.
georgehifi Details Discussions Posts This discussion 10,312 posts 06-02-2016 at 09:40pm Copy Comment URL Report Comment Edit Delete All tube amp should have this option, as it’s a few dollars in parts and easy to do. I used to put them on my tube amps, on or off. And yes no/less feedback = more amplifier gain. When the feedback was switched on, I also had a dial you could turn to vary the amount of feedback from almost zero to 35db of feedback. This also lets you tune the amps damping factor to the speaker, depending if the speaker was an under or over damped design. Cheers George
cjaronica OP Details Discussions Posts This discussion Message User 113 posts 06-02-2016 at 07:34pm Copy Comment URL Report Comment Edit Delete Thanks guys
czarivey Details Discussions Posts This discussion Message User 5,946 posts 06-02-2016 at 06:10pm Copy Comment URL Report Comment Edit Delete It decreases amplifier gain to bring more dynamic headroom.
charles1dad Details Discussions Posts This discussion Message User 10,250 posts 06-02-2016 at 06:08pm Copy Comment URL Report Comment Edit Delete Hi, Here is a cursory answer. Adding NFB will lower the amplifier’s output impedance and also increase the damping factor(DF). This can be advantageous for some(but not all) speakers. Adding this NFB will lower the gain of the amplifier thus the lower volume you note. Some speakers will sound better will zero NFB, it just depends on the particular speaker in use. For example my speakers sound their best with zero NFB amplifiers. Listen to both settings and choose what sounds best to you. Charles,

Log in to respond

More to discover

Lamm Industries ML1

Musical Fidelity A-5cr

Ayon Audio AYON CROSSFIRE P/A STEREO AMP