How To Control The Eager Beaver


I’m sure that there is a better term for this but my Googling didn’t reveal one.  Analog is a secondary source for me, generally confined to albums that never made it to digital.  So I got one of these 45 year old favorites from eBay and it has a common issue that I’ve had with other turntables besides my current one in the past.

  When I depress the cueing for the tonearm it skips the first few measures .  I have to manually and slowly lower the tonearm and even then it still does this about half the time.  This only happens with certain LPs.  Is it record warping?

 

  I had my dealer check the cartridge alignment a few weeks ago.

 

  Again I’ve tried Googling this and I just haven’t been able to come up with much except improper cartridge alignment and record warping.

  Just wondering what people in this Forum, who are an amazing collection of knowledge, think

mahler123

This may be just my tainted observation, but my tangential player tracks warps just fine...  Now, this could be a pleasant side effect from not needing anti-skate required with a pivoting arm.

Any thoughts?  Curious minds, all that....

Pre-thanks, J 

My only thought is that "just fine" is not quantitative.  Most of us would say the same for our pivoted tonearms.  Anyway, you raise an interesting question: what difference does it make tracking warps with a pivoted vs a tangential tonearm? Why would skating force and the application of AS make any difference?  Answer for me is I don't know.

@lewm 

When you wrote AS I read A$.

There should be no skating force with a linear tracking (tangential) tone arm, except some side force has to drag it across the record. I am somewhat familiar with the Holbo deck which has both an air-bearing for the tone arm and another for the platter.

@asvjerry

Traversing a vertical warp momentarily increases the tracking force, then decreases it as the stylus goes downhill.  With a pivoted tone arm, the skating force is proportional to the tracking force.  In the extreme when the stylus gets airborne, it will be pulled away from the center by the anti-skating device, which tangential tracking arms do not need