How does Berning ZH270 compare to Cary Cad211 AE ?


My system consists of Merlin VSM-MX, Cary cad 211 AE, Velodyne DD12, Aesthetix Calypso, Rega P9 with Konrapunkt C, ASR Riaa and all Valhalla cabling. I’m also experimenting with some DAC/PC stuff.

I wonder if the Berning is up to or par with Cad211AE. I’m very sensitive to hum and noise. Is the ZH270 noisier?

I have just ordered a ZH270 for test from Denmark, this because of no imports to Norway.
nr9
I have also heard that Joule is no longer supporting the Vamp. They discontinued selling the Vamp due to the high cost of production and I have to imagine parts and such are increasingly harder to come by. I was interested myself in a Vamp, but not the integrated. Based on the fact that it is a hybrid model using the same signal path as the LA-100 MkIII, the Vamp integrated should provide a slightly warmer sound, but with the addition of solid state power. My guess is that it would fall somewhere in between the Berning and Cary, probably closer to the Berning.
>> 03-09-06: Khokugo
>> ....
>> IMO if you are seeking the true sound of what is
>> recorded (and pressed), then ZH270 may be the way to go.
IMHO, from my experience with the ZH270, I find the same: good sound but very little or no music.
I can see why Bobby Palkovich likes the ZH270 - it allows him to "debug" his Merlin speakers (much like a studio monitor allows a mixing & mastering engineer to "debug his/her CD production).

>> 03-10-06: Greenman
>> I have not heard the Berning or this particular Cary
>> amp but I find most Cary products too warm and euphonic
>> for my tastes.
In general, that is my experience w/ Cary as well. However, of the few products that I have heard in their factory listening room + at friends places, if you can, do listen to the 805C Anniversary Edition. It is superb. It does not have the palpable midrange of their 300SEI amp but it is very close & far more balanced over the entire audio spectrum.
My friend has a pair of Cary Sixpac monos driving his Merlin VSM-MX speakers. This combination is absolutely divine. There seems to be a balance - the palpable EL34 midrange & high freq combined w/ the lean(er) Merlin VSM-MX speakers. Really fantastic music. It beat the ZH270-VSM-MX combination by many, many miles.

>> 03-10-06: 711smilin
>> ......
>> My suggestion is neither, as my Dodd 120 bettered each,
>> and most others in my most important catagory. Musical.
>> Extended. Detailed. Musical.
Good to read this 711smilin! It appears that you have been listening w/ your ears! Your words above are quite diff from what you had written in that other ZH270 thread back in Nov 2005.

>> and Merlin told me (it wasn't Bobbie but was another
>> guy there who said this was "Our opinion") they respect
>> and like the Berning but love the Joule.
The Berning comment is consistent w/ what I heard myself.
Back to answering Nr9's questions ...

"I have heard that the new units are supplied with better cabling and capacitor. Do you know anything about this?"

As far as recent model Berning ZH270 amplifiers being supplied with the upgraded silver wire and upgraded capacitors, I believe that is a premium option that needs to be requested when ordering the amplifier. My understanding is that most buyers have lately requested these options when ordering, based on the feedback here on Audiogon. I purchased mine used here on Audiogon with the silver wire and capacitor upgrades already installed plus the cryo-treated 6JN6 output tubes. I suggest contacting Allan Bhagan for a more definitive answer.

"I’m looking forward to receive the Berning amplifier and maybe mach up with new cables."

As for cabling choices with the Berning ZH270, I would recommend trying what you already have and experiment with the different feedback settings first followed by input tube rolling.

The primary voltage gain stage 12AT7 tubes (the pair closest to the BACK of the amplifier) are where you can most readily tailor the sound to suit your tastes. If your system leans toward the bright/lean side, then a warmer/richer sounding pair of 12AT7 tubes in the primary and/or secondary gain stages would be a good choice.

In my experience, input tube selection in the Berning ZH270 can be as dramatic as selecting cables, perhaps more so once the cables hit a certain level of quality (defined by high conductivity, plausible geometry, low dielectric, low capacitance, and SHORT LENGTH). Since the ZH270, like other good OTL designs, has such a clean and simple signal path -- the lack of interstage capacitors helps here -- and optimally biases the tubes/tube sections, different tube manufacturers tubes sound very different.

The 12AT7/ECC81 tube type was originally designed as a Radio Frequency amplifier. (Ever wonder why many of the top NOS supplies come from ex-NATO stock? They were used in military radars right through the end of the Cold War). 12AT7/ECC81 tubes can perform well in the audio frequency range, and were probably adapted slightly to do so during the post WWII high-fi boom, but all of the vintage manufacturers' designs have noticeable sonic profiles (even different designs from the same manufacturer). The "lush, rich, musical, walk in the forest, etc." sound is quite achievable with the Berning ZH270 by using the lower negative feedback settings in combination with input 12AT7/ECC81 tubes that have those same qualities (e.g. early Mullards, early RCAs, early Sylvania, etc. -- all of which are still available NOS, see my previous post in this thread for sources).

Selecting driver stage tubes (the pair closest to the FRONT of the amplifier) in the Berning ZH270 is also important -- especially to avoid doing any harm. Electrical properties do matter. The 12AV7 and 5965 types were specified for a reason: they work well and can supply current to the driver tubes at peak signal voltages approaching 600 Volts at full power. Many of the dicussions on the web regarding "better sounding" premium alternatives to the humble 12AV7 and 5965 types (e.g. the 7062/E180CC and 6829) are based on listening to these different tubes in preamps at much lower DC plate voltages and peak signal voltages.
>> 03-10-06: 711smilin
>> ......
>> My suggestion is neither, as my Dodd 120 bettered each,
>> and most others in my most important catagory. Musical.
>> Extended. Detailed. Musical.
Good to read this 711smilin! It appears that you have been listening w/ your ears! Your words above are quite diff from what you had written in that other ZH270 thread back in Nov 2005.

We each learn more every day, I try to tell it, how I hear it. I gave a valid suggestion of what I found to be true, for me. If you want more details comparing the ZH270 VS CAD 211, email me.

Good luck in your journey
Sorry to hijack this so shamelessly Nr9,but what made you decide to use the sub with your Merlins?I ask this as a Merlin VSM-MM owner who's curious.Thanks for your patience,Bob