Help!


Greetings all, I am certainly a Novice; I need help with the blue fuse for the Emerald Physics 100.2SE. How do you get inside the amp to swap fuses?
Any help would be greatly appreciated! Thank you very much!
Cheers!

128x128lostnamerica
noromance, Oh yes, that’s for sure.  I removed it when I had the top off.  I thank you for your concern.  I might end up just selling “as is” with the front leg off...darn
Still.
Cheers!
Oh yes, that’s for sure.  I removed it when I had the top off.  I thank you for your concern.  I might just sell “as is” with the front leg off...darn
Still.
Cheers!
I guess you’d have to remove the cct board. You might contact their support on this. A loose screw in an amp is not a good thing as it could short something out.
It worked! Thank you! I found another issue though. The bottom front foot had come loose (the single front one), and has separated from the case, I have retrieved the screw but don’t see how I will ever access it as the screw enters through the inside (under the pcb board). Wow....
The top is off, thanks to you guys and I do appreciate your help with that.
Bless you two !

Cheers!

Thank you.  I turned the power off for a couple of days, I appreciate the heads up. I found the screw (openings), but there is no pattern: hex, star,etc.  Just “smooth” openings as I thought they were just rivets...I will try to loosen them with a screwdriver.  Thank you both again, I’ll keep you posted.  
Cheers!
Unplug the power cord, unscrew the 4 screw on top to open the top plate and you can clearly see the fuse on PCB, be caution the capacitors may still charged!

http://img.ukaudiomart.com/uploads/large/1858817-emerald-physics-1002se-amplifier.jpg