Empire Turntables New in Box-Worth Anything?


I just found out that the guy I am friends with-his father- owned Empire Scientific in Grden City, NY.
What gear should I look for and what do you think it is worth if new in a box over used gear...
I know he has carts, tables, and arms.

Thanks for your help.
John
exoticaudio.org
128x128whatugot
Gregjcastro...Out of nostalga, I bid on one recently on EBay. I quit at $300...don't know what it finally went for.

The thing is very simple, and the belt and possibly the arm wiring are about all that can be a problem. Make sure that the arm bearings have not been damaged. (No looseness).

I replaced mine for two reasons. I wanted a linear tracking arm, and I wanted automatic set down as well as pickup of the arm. (I bought a Sony PS-X800).
Hi,

I just got a 398. A 398 is the same as a 208, except it comes with the spring-loaded 980 arm. There are two versions of the 980 arm - the original one, and a later arm that had anti-skating.

All Empire models that I'm aware of are belt drive.

Some prefer the early models, which had a much heavier platter than the later models.
I would take a 208 (or 398 and throw away the arm). It is a basic belt-drive TT with an excellent bearing, platter and motor. Belts can always be obtained or made.

Get two and I will make sure OUR TTs are tiptop. ;-)

Kal
The two main things to watch out for are availability of drive belts and a poor condition phono cable. The phono cable mates to the arm with a funky and unique connector I was never able to find anywhere else. If that craps out, I think you'd have to directly connect the tone arm harness to a cable. Belts are also hard to find. I was able to find a couple of them in a small stereo repair stores old inventory. Oh yeah, another thing. Make sure the headshell cartridge mounting plate is there and in good shape.
I am interested in an Empire 598 that is being sold by audio junkie that builds his own amps and speakers. He is going through it to make sure that it is working properly. What concerns do I have to be aware of and what would be a good asking price?

Thanks for your help.
Eldartford, I would have to agree with you about spring loading. I bet you never thought you would hear that. After abandoning a Garrard 301 in the '70s, I am back with one again. I have an adaptator of the old Ortofon 12" arm which use spring loading.

Since I have never heard such good vinyl sound, I would have to partially attribute it to the spring loading. I did have friends with Empire turntables in the 70s, however, and must say I was never tempted to buy one.
carl_e_miller@sbcglobal.net...Application of VTF by a spring was one of the BEST features! It meant that the arm was not unbalanced, and so was quite insensitive to vibration. (Will two audiophiles ever agree?)
My recollection of Empire tables was that the arm was not as
good as the table. I believe the arms were spring loaded for
dialing in stylus pressures and were somewhat inaccurate and
variable after set. But, they look nice. .... CEM
I am puzzled by the way that the spring-suspended table and arm is criticised vs the hard-mounted design. When I bought an Empire 598 it replaced a hard-mounted Rec-O-Cut and pretty good arm (of a brand that I don't remember). The Rec-O-Cut and arm were secured to a massive bluestone base. The improvement with the Empire was very great. I think the reasons were:

1. Suspended design. I could bump the platter/arm assembly so that it bounced up and down, and the LP would play on with no problem, because they moved together.

2. Movement did not affect the arm because it was staticly balanced. Downforce was applied by a clock spring.

3. I think the belt drive was better than the idler wheel.

4. The magnetic device to pick up the arm at the end was neat.
Gregadd, Ralph Karsten of Atma-sphere heavily modifies an Empire 208 or similar earlier Empire model. This is the turntable that he uses at the CES.

Here is the link: modded 208
I beleive there is am a maufacturer who could have any turntable he wants and uses a modified empire. Maybe someone else has run across it an remembers who it is.
Empire 598 and 698 turntables, complete with arm, were good solid performers, and would satisfy most people today. New in the box unused is a plus for any piece of mechanical equipment, where wear could be an issue.

I wouldn't put much value on a decades-old cartridge. The stylus elastomer mounting is probably hardened up.