2. analog
  3. 131092-79133

Dual 1249 Tonearm replacement

ok, so I have a design for a tonearm that I want to apply to my old Dual 1249 (I have a Dual 1219 that I have a custom plinth, Denon DL-103, used with a Linn LK1 preamp).
I want to experiment with at least a 10" arm, maybe a 12" one.
I can make a precise plinth that incorporates the correct mounting position, but would like to know how much of a pain is it, to take the stock arm off and have the motor still turn? I know I'll lose any automatic functionality.
Is it also a good idea to turn the table 90 degrees clockwise to aid in tonearm positioning? Looks like I'd have to if I used a 10" tonearm because of the cutouts on the existing 1249.
Hope this makes sense :)
128x128michaelhowell8339
3 responses Add your response
normansizemore
601 posts
 
Ditch the 1249 and mod the 1219! 
I have a 1229 and replaced the original Dual arm with a Grace 747. 

I have also had a SME 3009 on the table but now use that on my Garraed 301.

I removed all the automatic functions, and used a set of springs to tension the original on off switch. I also use a tone arm lift  for end of record play. 

The 1219 can be made into a killer turntable. I have a EMT 927, a Garrard 301 and the 1229. The 1229 is my favorite and gets daily play. 

Email me  n at normansizemore dot com if you need help. 

Enjoy 
N 

imhififan's avatar
imhififan
2,181 posts
 
No need to alter anything if using a outboard armpod!
  http://www.i-fidelity.net/uploads/pics/AAS_Gabriel_Ferrari_red_with_4_tone_arm_boards.jpg
imhififan's avatar
imhififan
2,181 posts
 
Why not considering add a 2nd arm or even a 3rd arm?
https://www.youtube.com/watch?v=Ms-MgQXSCNE
Log in to respond
More to discover
80x80
EXCEL SOUND CORP PRO-81 MC CARTRIDGE
80x80
Rega RP-3
80x80
Palmer Audio 2.5 Turntable