Drawer problem in Mark Levinson 39 cd processor

Call Madrigal tech and they have a re-calibration step that possibly might help? They were very helpful with me when I had my Proceed CDD. Also might want to search here and Audio Asylum. Goodluck.

I will preface my comments with the assumption that so far as you know, there is not a CD stuck in the drawer!

I have a 390S that is now my backup (since I jumped on the AR CD7/8 bandwagon) and I follow Levinson's recommended drawer calibration procedure about every two weeks. It works best if the drawer is open and even better if it is closed part way, but it works (so I have been told by the former dealer) even when you start with the drawer closed.

1. Turn off the power at the back of the 39.
2. Press the drawer open button on the front of the 39 and keep it pressed while you turn on the power switch on the back of the 39.
3. With the drawer open button still pressed, watch the front display on the 39 change as the 39 runs through its cold start procedure. When you see the word "calibrate" in the display, remove your finger from the drawer open button and let the 39 cycle through whatever number of drawer openings and closings its software determines to be necessary until the drawer is deemed (by the software) to be calibrated.

If this doesn't work, you will probably need to send it in for service. And from what I have heard/read, their service is unfortunately quite expensive.

Good luck!

I've own both a ML No. 37 and Proceed CDD, both of these transports have had drawer issues from time to time. Right now the CDD doesn't open up completely. I've also heard of many others having issues with ML transports, seems like ML has some iffy software.

I also hope the re-calibration steps 4musica speaks of works for different ML transports, would hate to screw up the software. Has anyone tried this re-calibration procedure on other ML models? And yes, their service is very expensive, the reason I haven't repaired the No. 37.

Thanks you all for the suggestion. I have approched their
dealer who is asking for the new unit price to repair it.
I will try as per 4misica44107 told. Let us see.......still I like very much sound from this player.

Please suggest, If am using this unit as a DAC, which is
the Transport will match ideally?

Thanks you all for the suggestion. I have approched their
dealer who is asking for the new unit price to repair it.

Do what???? How much??? Madrigal usually requires $900 up front and it is less then you get that money back. I would try the drawer calibration then seek out someone who can fix it other than the dealer or stealer...lol. If you want email me offline and I can give your the email of a guy out of St. Louis area who repairs equipment.

Sam

Do what???? How much??? Madrigal usually requires $900 up front and it is less then you get that money back. I would try the drawer calibration then seek out someone who can fix it other than the dealer or stealer...lol. If you want email me offline and I can give your the email of a guy out of St. Louis area who repairs equipment.

OK that response was full of typo errors and I am sober. Try again:

Do what???? How much??? Madrigal usually requires $900 up front or deposit. If it is less then that you get money back. I would try the drawer calibration then seek out someone who can fix it other than the dealer or stealer...lol. If you want email me offline and I can give you the email of a guy out of the St. Louis area who repairs equipment for much less than any dealer or factory.

Thanks Samx12. I have tried and just it was opened one time. The second time the display shows as Failure. hence I feel better to repair it. If you contact details of madrigal, Please provide and still they are intrested I will go far private repair, who is in st. lois (I will ask the details later). My Email address is rabbanipm@gamil.com
plsss.