Don't try to fix these electrical prolbems with a conditioner!
Over the years of hanging out here I’ve seen a lot of audiophiles with significant electrical problems try to fix them with a power conditioner. Lordy. Look I’m a big fan of power conditioners and as you all know recommend Furman often... but they can’t fix what they can’t fix, and may mask serious problems.
Ignoring an electrical problem in your home is to ignore a property and life safety issue.
Lights flickering? Feel a tingle when you touch your equipment (or washer or range)?
We are used to seeing famous authors recommend weird/bespoke AC panel solutions, or isolated circuits, which of course are not free. My two recommendations here will set you back $20 or less.
A tool every audiophile, no, every homeowner should have is an AC outlet tester. You can get them at any hardware store but I like the cheap-o Kawaits style from Amazon because they include AC voltage AND, critically, Neutral to Earth voltages. All you have to do is plug it in and watch the AC. Is your AC stable while playing music? Does the N-E ever rise above 2 Volts? Do the red lights on the top light up as they should? Then you are good. (PS, a nice voltage meter is better and more reliable, but this is an excellent and safe alternative for those who don’t have a soldering gun in their desk at all times. ) . Don’t stop at your audio rack, check your other outlets too, especially if you’ve moved into an old home.
The other recommendation is to at least inspect your outlet. If it’s just old anyway replace it with an outlet that is rated for commercial AND residential. About $5-$7. Make sure your outlets are using screw down terminals and not back-stabbed (i.e. push in) terminals. I wrote more about this here. Again, I know there are many here who are going to recommend bespoke extremely expensive jewel like outlets. My feelings about all that are in the blog. My point in this post is to suggest super cheap tests and improvements any audiophile can afford.
Be safe. If you see signs of electrical problems don’t patch over them with a conditioner.
Big twin, if you come across loose electrical connections, it’s important not to just tighten them. The conductor should be cut back,stripped,they properly torqued. You might find the torque specs on the device, or the manufacture’s website. It’s a pain but as they say the electrical code is written in blood…. rich |
Have you finished your basement project? Can you share what it is that you did with reference to running lines for your rig?I could just buy what you installed... If you ran more than one, did you distance them from one another and is it OK to simply have them sit side by side within a couple feet of your equipment rack?
|
@wsrrsw - Excellent numbers. Now just watch it during the day. :) |
