2. analog
  3. 1374131052

Budget 2-ch vinyl playback system?

I want to put a simple, inexpensive (but nice) 2-ch system for vinyl in my office but have no starting point as my main gear is all digital and I have never owned a turntable.

Don't worry about the speakers, I will build something under the guidance of Selah Audio, tailored to the rest of this system as I have done for my main system.

There is already a good thread on budget turntables so I will refer to that but I think that leaves the need for a preamp and amp as open questions.

Please let me know your thoughts regarding this topic.

Thx
kooshballa
9 responses Add your response
marakanetz's avatar
marakanetz
5,473 posts
 
Wow interesting moniker. Do you like Koosh? I like Diesel better, but sometimes I miss Koosh.
Project Debut if you try hard you can get at discounted price that includes Ortofon 2M red cartridge.
PS-Audio phonostage with volume control hooked up to active speakers of studio grade such as Mackie or M-Audio or even Samson.
manitunc
795 posts
 
get a nice, used 70s japanese Direct Drive table for less than $300, even with cartridge. Plug it into a 70s integrated amp with phono for less than $150, hook up speakers, and away you go.
zenblaster
504 posts
 
It's hard to beat the sound of what Marakanetz proposed for the money. Audioengine or Emotive acrive speakers would sound good also and sound more refined than you will find wit 70's gear.
cocoabaroque
36 posts
 
nad PP-2 phono preamp, used about $80, and your choice of "brick" gainclone amp--by Topping, HLLY, SMSL, or others. I like the TA2024 or LM1875 chip-based designs, but if your speakers need more power, try other class-d based amps, most about $100 or less. Amazingly-good sound, reliable and affordable.
johnnyb53
3,510 posts
 
If the OP has already decided to source speakers from Selah, then the simplest solution from there is a Pro-ject Debut Carbon turntable with included cartridge, and an integrated amplifier with built-in phono stage--something from Marantz, Cambridge, Creek, NAD, or Rega depending on your budget and size and power needs or limitations. For example, a Pro-Ject Debut Carbon and Rega Brio or Marantz PM8004 (which has an excellent phono stage).
phasecorrect's avatar
phasecorrect
2,013 posts
 
When shopping for a dedicated phono preamp awhile back...the Project box(standard issue-non tube) and Grado PH-1 were head and shoulders above the competition...at least at their respective price points...I also demoed the low end ROlls (Red Unit) $50 as was pleasantly surprised by its performance....FWIW...I have owned entry level REGA/Projects in the past...one really needs a dedicated wall mount to make them work properly...something I was unwilling to due...hope that helps....
kooshballa OP
24 posts
 
Thanks, this is good info.
pacmi03's avatar
Ag insider logo xs@2x
pacmi03
19 posts
 
Rega RP1
Rega Brio R

I have this set up and it is unbeatable for the price. Phono is built into the amp so no need for a phono pre amp.
johnnyb53
3,510 posts
 
08-01-13: Kooshballa
Thanks, this is good info.

04-16-14: Pacmi03
Rega RP1
Rega Brio R
I hope after 8-1/2 months the OP figured it
out.
Log in to respond
More to discover
80x80
Garrard 401
80x80
Rockport Technologies Sirius
80x80
Thorens TD 124