40+ watts SET, cost is not a problem


Friends,

Hope everyone is well here. I am visiting after a long time. I have a query on behalf of a close buddy of mine. He is using a pair of TAD CR1x loudspeakers. Gorgeous speakers for sure. The source is an EMT 927 TT & JPA66 preamp. For the amplification things are getting tricky. He has tried the TAD M700s reference power amp and while it sounds very controlled, it doesn't have the openness and dimensionality of tone that a good tube/SET amp provides. We are considering trying a good SET for this system. Given that TAD needs some power blossom well and expand on effortlessly, at least 40 watts of SET power would be needed. The quick choices are Kondo Kagura & Wavac HE833 Mk2. But I need more suggestions on these and other comparative products.

1. Has anyone heard the Kondo and Wavac gears to suggest a comparison? I am just a bit worried on the amount of Silver used in Kondo. I have normally found that silver takes away something from the flow and harmonics. Tell me more about it.

2. What other options can be considered in this realm? No SS please. Looking for SET options primarily.

 

Room size is moderate 17 x 13 feet. Music preferred are classic rock, jazz, pop and some classical

 

pani

What you are looking for does exist and can sound superb with your speakers.  

KR Kronzilla's would be an interesting choice.  The tube is esoteric but it sounds really good and delivers a lot of power.  Not exactly like a 300B but 300Bish. KR also makes a 40w 300B push pull.  

Alternative options that would be intriguing would be the Art Audio Quartets (845 push pull) and Opus 4 (Kt88 push pull) that deliver a very engaging experience.  They both use a small amount of negative feedback.   These are both 45w in triode.  Michael Bump did a review of the Quartets a few years ago.  Bob Grossman recently did a review of the Opus 4s.  Both for Enjoy the Music.  

The CANOR Virtus M1 monos are a KT150 based amp that is switchable between 0dB of negative feedback and 6dB.  They also allow for switching to Ultralinear and are 110w in that mode.  Several reviews have been done in Europe on these amps.  

Aries Cerat makes a few amps that are higher power and deliver what you are looking for.  The Concero 65 is parallel SET running the 813 tube.  The Essentia is a SS Amp that sounds very much like a SET and could do a nice job.   

None of these are inexpensive but all are stunningly good amps and will do okay with your speakers in that smallish room.  They either have 4ohm taps or in the case of the Essentia are stable to 1 Ohm.  

Full disclosure, I am a dealer for all these brands.  That said, it also means I have tested these amps in the real world.  I have publicly shown speakers as low as 84dB sensitivity in rooms about your size with the Art Audio and Canor amps and have heard the Kronzilla and ACs in similar spaces.  

You could also go with a more traditional design like VAC or a hybrid design from a brand like Riviera.  Any of these will shine like the sun with those speakers.  

 CAT JL5. Convergent Audio Technology 

This is so easy. The CAT JL5 can drive the smallest speakers with all of the detail and sound stage you could ever want. I just saw them at Axpona driving the new baby Clarysis Piccolo speakers. Also, my friend has olderCAT equipment driving his Tekton tower speakers which are pretty efficient. You did say cost is not a problem. The CAT JL5 was also used in the Aretai speaker room driving their book shelf speakers. Which are not hard to drive at all. The JL5 can work with anything.

The one thing I was surprised about is the run very cool for a tube amp even while driving huge speakers. 
 

Thats a nice problem to have, really superb equipment.

Already the predecessor R1 was outstanding however also demanding on the upfront chain but truly world class.

I may have a soulution for sale.

My thoughts are that there is one pair of Single ended that easily can feed the TADs

The older Siltech single ended power ampilifiers SEPA are giving out 80w/8 ohm real class A from a single nuvistor tube. 
A group compared them and the Kagura monoes mk1 and the Siltechs were clearly better and with an extreme lifespan from the nuvistor tubes also winns there.

They are however rare and were only produced in 15 limited pairs and actually not even set up for public sales but only for Silteck picked out distributors around the world at the sum of 130.000. Which with a normal profit factor would have had a retail price of around the double and in the Kagura area.

They weighted almost 60 kg each and all wire included transformers were the G5 silver/gold aloy from Siltech.

Only a few have be up for sale until now but soon I may put up a set and they can be testet in AB against a set of Robert Koda K70 mk2 which also are a outstanding poweramp.

Happy listening.

 

If I have to go push pull, my first choice would be a CJ sa108 monoblocks with Art88 preamp. But I am so keen and smitten by SET that I will first explore it well. 

@pani

But I am so keen and smitten by SET that I will first explore it well!

As well you at the very least should do. I recall sharing numerous interesting threads with you in past years. You have extensive experience With a wide variety of  Audio components. At this stage it is fair to say that you know what you like and what and what you are seeking.

 

@verdantaudio gave you some promising SET options, Aries Cerat and KR Kronzilla. Also VIVA Audio PSET 845 I’d mentioned previously. There’s an excellent PSET 845 made in Japan by Triode Corporation. These are big 50 watt per channel mono blocks. I’ve heard them personally and they are splendid! I believe that a top notch SET, PSET or DHT class A push pull amplifier will deliver what you are searching for sonically and musically.

Charles