yogiboy
Responses from yogiboy
| Phono preamp question To drive your amp with a phono preamp it would have to have enough voltage and gain with a volume control. This is the kind of phono preamp you would need to drive your amp directly. BTW,my friend uses that EAR with no preamp. I tried my Quicksilv... | |
| Best small used monitors under $1000 @ brianportugal Like I said,all of them are very similar. The later models have a tad more bass. If you don’t like your 3/5’s then I doubt you will like the newer ones. BTW,what fakes are you talking about? | |
| Best small used monitors under $1000 I’ve owned the 3/5, 3/5r, 3/5r2 and the SA1. They all sound very similar except for the SA1, which was brighter than the rest. BTW, I now use the Harbeth P3ESR that I like better than the Spendors or any other LS3/5A type speaker that I have owned! | |
| Integrated amplifier suggestion for Revel M16 - Help me with specs! The 301,501and 701 all have phono sections. So it would be what your budget allows. | |
| Questions about pairing Benz Micro cartridges with appropriate tonearms I don’t see any problem . Here is some more information on cartridge and arm compatibility. You don’t want to go too far above or below 8-12 hz!https://www.gcaudio.com/tips-tricks/tonearm-cartridge-compatability/ | |
| Harbeth p3esr SE +1 seikoshaThat dealer is giving you bogus information. The se uses OFC wiring. I’ve owned 3 pairs in 3 different types of wood and they were all called special edition. I have never seen any other. If you doubt it then you should give A.Shaw a call! | |
| Questions about pairing Benz Micro cartridges with appropriate tonearms If you put the information of the arm and cartridge this chart will give you an idea of the compatibility !https://www.vinylengine.com/cartridge_resonance_evaluator.php | |
| Integrated amplifier suggestion for Revel M16 - Help me with specs! Check out Yamaha!https://www.crutchfield.com/S-9tT3wkQmYIp/shopsearch/yamaha_integrated_amplifier.html?XVINQ=SX4&... | |
| Preamp 6922 tube help GE 6DJ8 from 1960's is a real nice tube! | |
| A vote for the little guy suppliers Quicksilver Audio,tube amps and preamps - Mike Sanders | |
| Inherited 21 piece of vintage McIntosh and need help building a system You should give this place a call. I’m sure they will help you out!http://www.audioclassics.com/ | |
| Questions regarding used Jolida tube integrated I looked at today. You should pass on that amp. It could be anything from the power transformer to bad caps. Find something better,you sure don’t need a 150 watt tube amp for Klipsch speakers. If your friend wants a tube amp anything 30 watts up will be fine! | |
| 2 Channel Subwoofer connection +1 avanti 1960The JL Audio D110 is an oustanding sub. I use one with my Harbeth monitors and it works better than other subs that I have used. Crutchfield has a return policy if it doesn't work out for you! | |
| Harbeth p3esr SE Any Harbeth P3ESR is called special edition! | |
| Puzzled... @dlcockrum It’s Dynamic Range Compression used in the recording process. Most of my Sheffield Lab Direct to Disc are a lot lower compared to most others. This should explain it!https://en.wikipedia.org/wiki/Dynamic_range_compression |