yogiboy
Responses from yogiboy
Need recommendation for replacement of Vintage Conrad-Johnson PV-11 preamp. If you like it you should give CJ a call, I'm sure they will repair it! | |
Need suggestions please! Electrical noise in my system and it's driving me crazy! Move the circuit that your system is on to the opposite side of the breaker panel. See if that fixes the problem! | |
Harbeth P3's or CS7 easier drive Hi fjn04,I use the Silver 70 (70 watts) PP amps. You should give the C7’s a try you might like them better. They just weren’t my cup of tea! BTW, my friend uses a 50 watt Rogue tube amp with his P3’s and they sound great. Harbeths are tube friendl... | |
Harbeth P3's or CS7 easier drive I’ve owned both and set them up side by side. I did not find much difference in efficiency in either one. BTW, I preferred the 3's in my 20x15 size room so I kept them! | |
linear tracking turntables Here ya go!http://www.nytimes.com/1983/03/27/arts/sound-tonearms-is-linear-better.html | |
Missing and/or greatly recessed sound It sounds like your system is out of phase. Try reversing the positive and negative on one speaker and see if that helps! | |
Subwoofer recommendation Why buy used? You can get a SVS SB1000 new and shipped for $500! | |
turntables Yes it is! | |
Best amp for KEF LS50 Sounds like it’s time to try tubes. Check out the Rogue!http://www.needledoctor.com/Rogue-Audio-Cronus-Magnum-II-Integrated-Amp | |
Seeking Advise on New TT/Cart Purchase Check out SOTA!http://www.sotaturntables.com/newprod.htmAnd the Grado reference Sonata!http://www.gradolabs.com/cartridges/reference-cartridges | |
Dynavector XX2 MKII? Your thoughts of it? Here is info on stylus life! HOW LONG SHOULD A STYLUS LAST?A worn stylus damages records, causes distortion, and affects tonal response. What, then, is the life of a phonograph stylus, and when should it be replaced? The first part of this questio... | |
Best integrated for PSB Imagine T2's If you want to spend less , this Bryston would be fine. The PSB’s have a 88db sensitive rating so you don't need globs of power!http://www.audioadvisor.com/prodinfo.asp?number=BYB60RSST | |
Would an ARC Ref 6 be a good match for a VTL S200? The rule of thumb is the input impedance of an amp should be at least 10 times the output of a preamp. The AR output is 600 ohms balanced and 300 ohms unbalanced, the input impedance of the VTL is 45k ohms. They should work well together! | |
Room Acoustics - Best way to cover a glass door? Cellular shades!https://www.blinds.com/c/cellular-shades/34 | |
My Home Speakers, My Car, and Me...The Ballad of What's Going Wrong? That room is too small for the speakers you are using. What are the new speakers you plan on using? Keep away from rear ported type speakers. You would be better off using a LS3/5A (sealed 2 way) type of speaker for a small room like you have! |