xactaudio
Responses from xactaudio
| Glanz moving magnet cartridges Yes Nandric, I know of the MFG 61 | |
| Glanz moving magnet cartridges Dgob, are your G5 & G7 MMs? What cantilevers does each use? Do the bodies look like the Astatic MF series? Have you tried interchanging styli? The Astatic 100/200/300 as well as the Glanz MFG series are all Moving Flux. Hence the MF model desi... | |
| Review: TECHNICS EPC-P100C-MK4 Cartridge Hello Raul,If you consider selling your EPC-305MC MK2, please let me know.Steve | |
| Has anybody tried the Reed 3P? Red cedar, Pernambucco and Panzerholz measure well in accelerometer tests but all of the hardwoods offered for the Reed arms measure fairly close to each other. To my ears, the different hardwoods I have compared sound essentially the same. The We... | |
| Has anybody tried the Reed 3P? Suteetat, are you using the 3P or 3Q? I noticed your system page lists the 3Q. | |
| Has anybody tried the Reed 3P? Lew, the paragraph in which I used the Tri-Planar reference was talking about noise from anti-skate (AS), not azimuth adjustment. Sorry for the confusion. The noise comes from the pivoted AS lever rubbing against the stationary pin attached to the... | |
| Has anybody tried the Reed 3P? Hi Guys, First off, I am the Reed importer and every thing I say here is my opinion and it may be worth what you are paying for it... The sound? For me the 3P has a more refined sound than the 2A. More air is the first thing I hear. The sound, top... | |
| Has anybody tried the Reed 3P? I have. | |
| Who needs a MM cartridge type when we have MC? Yes Citizen Lew, "stylus assembly" is what I was trying to describe. I knew when I mentioned glue, there would some that would rather shoot their dog than put glue on their prize cartridge(s). I am not advocating it for everyone or all MM carts bu... | |
| Who needs a MM cartridge type when we have MC? Hello citizens. If you want to get the most out of your 4XX series Acutex carts, try this. Remove the stylus guard and super glue the stylus holder to the body. Just a drop on each side and on top is enough. The stylus holder on both of my 420 uni... | |
| Garrard 301-Worth the effort? Rccc, congrats, you picked up on one of the many "facts" posted in this thread.Here are a few more...**The wheel ... and be of proper diameter to DRIVE the inside face of the platter properly. ****the 301 LOVES mass**How many more can you find? | |
| Lenco and Garrard external ac power supply Lew, to a degree yes, you could control the Lenco. I do have at least two customers that have tried using newer PS Audio units on their Garrards and were less than excited by the results. I do not know much about the newer PS units but I lived wit... | |
| Lenco and Garrard external ac power supply Correct Jeremy, the speed of the 301 motor is, in large part, determined by the frequency of the mains. The voltage controls the torque and will affect the speed to a much smaller degree. The 301 will operate at correct speed with 47Hz and around ... | |
| Lenco and Garrard external ac power supply Actually, the 301 does not really care what the voltage is as far as sound quality goes. Voltage is important but more so for other reasons. What makes the sonic improvements in a 301 is the frequency of the voltage. At 47Hz, the 301's motor will ... | |
| About Lugnut -- Patrick Malone Been thinking of Pat this week myself. Pat was a great guy and a great listening buddy. He could walk into my music room and tell what had changed even though it had been weeks since he had last heard my rig. Pat was 55 when he left us. A few year... |