tpsonic
Responses from tpsonic
| Room Correction Hardware options ? I have used the Z-Systems with great effect.Have heard this in many high-end systems and have always enioyed it. | |
| adding a sub Parts-Express:Dayton Reference drivers and the 240W plate amp.Allows high and low level input and adjustable crossover,level and phase.The 1K ohm/high level input will not effect the impedance that your amp will see. | |
| Bluenote BellaVista Turntable Bluenote had a package deal for $3500>>Bellavista/arm/cartridge.You might "google" it to find the model. I love the Allaerts Eco on my table. | |
| Thoughts on new amp CJ 11/11a,PrimaLuna PL 5/7s,VAC kt-88.A 50-80W/ch tube amp should be enough.Auto-bias is usually a plus. | |
| Low Noise Tube Suggestions Give Andy Bauman/Vintage Tube Service a call.His pricing is reasonable.He carries three grades of tubes-line/MM/MC.His MC graded tubes have been extremely quiet and dependable. | |
| Newbie seeks advice - please help Since you are using just a CD player,had you thought about an inregrated.I have been playing with the Winsome Labs Mouse.It is a very good unit and cheap ($410 delivered).Has a single input with Alps pot.Open up the potentiometer and you are ready... | |
| How Many Turntables Have You Owned Forgot the C.J Walker/Grado Signature arm combo-12. | |
| Which Intergrated amp for starter?? If you believe you can get by with 30-45W/ch,you might look at the Winsome Mouse.I picked one up and really wasn't expecting much.I have been suprised at the quality of sound that it produces.It is a single input unit with the Alps Blue-velet pot.... | |
| room treatment effectiveness In a digital based system,the Z-Systems might do the trick:RDQ/RDP. | |
| How Many Turntables Have You Owned Sanyo,Garrard,Rega 3,Oracle Delphi,VPI 19,Goldmund Studio,RPM 2,Walker,Scheu/Eurolab,Nottingham,Bluenote-11 plus or minus.How about arms?? | |
| Need guidance on isolation devices Start at the source. | |
| Need guidance on isolation devices Scratch the "tiptoes" and find a brass version.The originals are not expensive,but will contribute some brightness. I'm a firm believer in "the wood effect" and the brass footers compliment this approach.Mass is important,when considering the foot... | |
| Shahinian Obelisk Passive Radiator Replacement Always best to call and discuss the problem with one of their techs. | |
| Removal of Optimus/Lineaum dipole tweeters Thanks Ait. Any use in "hot-glue" and damping in the front plastic panels? I am using a first order X-over at 5Khz.I decided to use the same capacitors that I used in the DIY speakers that I built previously:PAS 4.0Uf with the V-cap .01 as bypass.... | |
| solder-Eutechnic,Wonder,WBT?? Thank you to everyone who has taken the time to post. I have ordered a small quantity of the WBT to experiment with.I will be using it to modify the Lineaum LX-10s.Just waiting for the last 4' of OM ribbon and the V-cap .01Uf by-passes to arrive. Tom |