testpilot

Responses from testpilot

Effective length of Origin Live Encounter
Measure the tonearm's effective length by drawing a straight line from the arm's pivot to the center of the headshell slots.  Please see the attached diagram.  https://www.analogplanet.com/content/tone-arm-geometry-101The 9 inch will have an effec... 
Isolation Transformers
Thanks Eric, could you expand on the semi-active ground lifter comment.   
Isolation Transformers
I want to isolate both my pre and phono stage from the main lines to reduce noise etc. On occasions, I also get a ground loop issue.  I run large power hungry mono block amp and I don't want to go the large transformer route.   
Isolation Transformers
@jea48 given the choice between the hospital grade Tripp-Lite and the regular Tripp-Lite that you referenced in your post, do you have a preference?  I am only concerned with front end equipment isolation i.e. low power requirement. 
What is the one piece of advice you would give about attending AXPONA?
It's your hobby, therefore, treat it as such and have fun.   
What is the one piece of advice you would give about attending AXPONA?
Leave your wife at home 
Furutech AC torque
Sorry, I don't have a specific number but from my own experience you can really clamps down on the screw terminals to to the point of almost having a gas tight connection.  I've never stripped a screw termination. 
What is the one piece of advice you would give about attending AXPONA?
Pull out the Rolex, comb your hair and wear a sports jacket - that way dealers and exhibitors will give you the time of day. @testpilot - if I only have two out of three of those things, what will that get me? @kcpellethead, based on your us... 
What is the one piece of advice you would give about attending AXPONA?
Pull out the Rolex, comb your hair and wear a sports jacket - that way dealers and exhibitors will give you the time of day.   
Anyone hear the SS Paua Mk.II ES yet?
I believe that Peter has realized that people also buy with their eyes.  His former cartridge were not the prettiest.  Also, a Mk2 is always a good business strategy to boost sales 
Product purchasing decisions based on manufacturer’s proximity
A brand's reputation is more important to me than origin of manufacture.  All thing being equal, I will always choose a domestic product over foreign.  
Is it common for tubes to outweigh the cost of the amp or preamp?
300B tubes can often exceed the cost of the amp.   
Turntable that will be around heavy foot steps?
Install a turntable shelf on a load bearing wall.  Any turntable will skip when placed on a rack on a springy suspended floor.   
Cary CAD-120S MkII vs VAC Signature 200 iQ
The VAC at nearly 3 times the cost of the Cary it better be a clear winner.  
Wyetech Sapphire
I would first take it to a reputable tech and get an diagnosis.  Hebert is known to be moody and unpredictable which is too bad because he makes excellent products.