stringreen
Responses from stringreen
| How do YOU set VTF on your Rega arm?? ..it seems to me that by using the spring to adjust the downward force, you still are including it in the system and it will still resonate...perhaps though at a higher frequency. Never the less, the rear counterweight would have to be set farther... | |
| Cartridge recommendations VPI Scoutmaster I went from a Grado Sonata to a Benz Ebony... WOW - what a difference. Its as though the Grado was broken | |
| Maple or Granite Try the Gingko platform - you will be pleasantly surprised | |
| The Worst Speaker you have ever heard. Guys...this is an AUDIO forum | |
| The Worst Speaker you have ever heard. Funny you mentioned Watt/Puppies. I thought they were so unnaturally bright they sounded as though my dentist was drilling in my ears. Another bad and overrated speaker is the VanSchweikert. I heard many permutations of them and they all sounded B... | |
| Q: Playing empty/last groove ? I'd say that your cartridge is 4 hours older - no damage | |
| How do YOU set VTF on your Rega arm?? The spring resonates at some frequencies, and is therefore better set to zero and use the weight for the downward force needed | |
| Interconnect and Speaker Cable Burn In Interconnects can be burned in quietly. Don't turn on the amp, but turn on the CD player, and the wire from the CD to the preamp will burn in. | |
| Another speaker wire possibility at Home Depot??? Honestly - check out their THHN - put spades on the ends and enjoy. | |
| Another speaker wire possibility at Home Depot??? Some of the best speaker cable is Home Depot's THHN. I don't know what that means, but use a leg for plus and another for minus, and its really good. | |
| Strange Tonearm Tweak. Long When I had the Rega arm, I noticed that unsing the spring to exert downward force for the cartridge pressure caused the spring to vibrate and cloud the sound on some frequencies. I simply didn't use it, set it to zero, and used the Expressimo weig... | |
| Strange Tonearm Tweak. Long Your idea is not really new. Take a look at the VPI arm. There are 2 outrigger weights that are not there for azimuth adjustment..this is done by rotating a dropped counterweight. In truth the problem with this arm is that it is quite diffucult to... | |
| What could be wrong? You fixed it by cleaning the connections. Its a good idea to unplug and plug everything once in a while to clean. | |
| VPI table owners, help please. Yes, I know that Cardas is recommended, but I have an all Ayre system, and nothing was quite as bad as Cardas. As a matter of fact, Ayre branded cable is Cardas. I don't know why Ayre recommends it except perhaps for the bottom line. I use the che... | |
| VPI Alignment Jig CAll VPI.. My alignment jig was set up when I got it and considered that to be correct. |