rwwear

Responses from rwwear

DVD and Laser Disc Catalog
http://www.mindspring.com/~laserdiscforever/ and dvdlaser.com 
What happened to Monsoon Audio?
Maybe they are all washed up. 
Best speakers for Opera.
Headphones are best for opera {for everyone else}. 
Help With Template for SME 309
Try these folks. http://www.nakedresource.com/news.shtmlThe cutout is the same for all of the 9" SME arms. The angle of the cutout with relation to the platter is the only difference. 
Halo A51 transformer hum...Need power conditioner?
You should consider running a dedicated grounded circuit to your audio system. 
Bi-amping with no pre-outs
Just put a "Y" cable on the sub out and send the signal to the left and right amp inputs then connect the subs. You will be using the crossover in the receiver. 
Speakers hum and buzz when rr and dbx installed??
Try the DBX unit in another system. It could be at fault. 
Speakers hum and buzz when rr and dbx installed??
If the DBX has a three prong power cable, try using a two prong adapter. If this does not work try another pair of patch cables and be certain that they are plugged in all of the way. 
Not Enough Power???
Maybe, if you play it loud. You may be able to find another KSA-80 and have them converted to mono and have KMA-160s. 
what is the best way to add remote control
A latching power switch stays in the on position if power is lost. In other words, the amp will come back on when power is restored to the recepticle. 
what is the best way to add remote control
If the amps have a latching power switch, you can use an X-10 outlet. 
Is Clipping an amp always Audioable?
It is true that too much power may damage a speaker but it is not likely if it is clean power. Distorted power or clipping is much more likely to damage a driver. 
Are There Any Inherent Advantages to Class A amps?
The Krells are Class A to their rated output. 
Why does my reciever get hot?
It is probably the processor that runs hot. 
Dynavector Karat 17D cartridge problems
Stanalog.