rodman99999
Responses from rodman99999
| Biamping B&W 802 with Musical Fidelity and Bryston Should you find that the bi-amping doesn't alleviate the problem, here's another option: If you open up your 802's: You should be able to easily find the tweeter section of the crossover. There should be two 3 ohm Vishay resistors in parallel with... | |
| Best 'Gon humor Mr U- Actually: It was directed to Mr A, but Mr G got his posted first. Thus it became an, "If the foo $hits, wear it" kinda thing! | |
| KT88 Opinions I'd been using Phillips 6550's in my Cary SLM-100's for a few years and thought they were getting a little weak. The prices of NOS anything(let alone matched quads/octets of anything NOS) nearly left me apoplectic! I tried an octet of EH KT88's(cr... | |
| Amplifier for avantegarde duo 2.2? Apparently, these work well with Avantgardes: (http://tomevansaudiodesign-usa.com/_wsn/page4.html) You might inquire from these guys as to the combo's traits, since they sell both lines; (http://avantgardeaudio.com/index.html) Any high quality SET... | |
| Will adding a preamp dramatically change my sound? It depends entirely on the output capabilities of your source, and the sensitivity of your amp(s). If the source has the drive to achieve the SPLs you enjoy with your amp/speaker combo, you'll be happy. I thoroughly enjoyed the transparency I expe... | |
| Best 'Gon humor Now THAT'S funny!! | |
| Biamping B&W 802 with Musical Fidelity and Bryston The Bryston would be light years ahead of the Adcom, even though you're only talking about the lows. Are you certain the Toshiba is not the source of the harshness? Do you have an analog source available(TT or tuner) for comparison? Any triode bas... | |
| Best current EL34 tubes If you buy the Winged "C"(which I would also recommend): be certain they are the newer ones(from the St Petersburg plant) and not someone's older stock. You won't find a more dependable seller than Upscale. Check out his test/burn-in procedures(li... | |
| Speaker cables for soundlabs and strong current I'd second the Kimber 8TC(and who would know better than the system's designer, what would work best). An excellent, easy to work with and fairly heavy gauge(8) cable. It should virtually disappear in a short run(the best quality a cable can posse... | |
| While listening to my system my Rhea blew up Film dielectric breakdown, possibly from over voltage condition, high peak current or over temperature. When a cap breaks down, hydrogen is generated inside. PC mounted caps have "vents" (grooves) in their tops that are supposed to let this pressu... | |
| How do you connect your single wire and jumpers ? The possiblity of your being able to hear a difference between having the cable on the high, low or diagonal posts are somewhere between zero and none. The only possibility being if you have REALLY cheesy jumpers. In that case, doing the diagonal ... | |
| While listening to my system my Rhea blew up The smoke and pop sound like a capacitor. | |
| Tubes? YES- Mr A has nailed the ones that would be most desirable to an audio-tube user. If they are NOS, they could put some change in your pocket. You might try contacting Audio Classics(Vestal, NY), and asking if they would grade the tubes for you. | |
| RadioShack Sound Meter Point it up or it won't accurately read the SPL reflections from the back and side walls. Every reflection in the room affects the freq. response at your listening position. I suppose those calibrations would be of some value if there was any cons... | |
| Golden Ear award for $55 speaker tweak When I had my own shop, and designed my own speaker line: The systems that didn't incorporate a ribbon tweeter had the Peerless 1" dome(this was started in '81). I always added a 6" foam donut w/a 3" hole around the dome. They never rolled off the... |