ricevs
Responses from ricevs
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure stephendunn, Sure,,,,no probem.....but then you do not get to tune your system with different flavors of speaker wire. And, as debjit said....experimenting with wire is made very hard. If you have mono blocks then absolutely you can mount them r... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure The Nenuphar might have slightly deeper bass than putting the driver on an open baffle. My friends 10 inch lii driver on the open baffle I described is flat in large livingroom to 40hz and 5 db down at 30. The Nenuphar cannot move that much air at... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure The reason Cube (and most companies) do not make open baffle speakers is that it is not an easy sell. The baffle needs to be large, you need space behind the speaker or you do what Nelson does and add woofer below. They are selling a look....a lif... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure david_ten There is no such thing as a thread that only mentions one speaker. Already people are talking about Horning, Charney, Voxative, and whatever. Of course, people want to know how Cube compares to whatever.......this is what the game is ab... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure A bypass cap is just a smaller value cap that goes in parallel with a larger value to extend and purify the signal as large capacitors are inductive (therefore not as pure or as extended as a smaller cap). There is no cap in the Nenuphar. If you... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure Grannyring, This is a full range driver. It has no crossover, no caps, no parts | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure Everything has to be taken with a grain of salt.....including what you say. For instance, I am not the Rick Schultz of High Fidelity Cables. I am the Ric Schultz of Tweakaudio.com. Even though you are wrong about this.....you are still worthy. You... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure It is not just one thing that makes a differerce....it is everything you do. better wire, removing the sound of the jack connection on the speaker, removing the sound of the WBT binding posts, adding the enhancment of Ground Enhancers and the Bybe... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure If you want to make any cube speaker way better then do this: Remove the driver and the binding posts. Solder super wire directly to the voice coil wire.....no longer usng banana plugs into the banana jack....solder the speaker wire to the end o... | |
| KEF Blade 2 What do you mean by a lot of what I say? The parts differences are clearly seen in pictures on the web. It is all hearsay unless Kef themselves says it. Dealers get stuff wrong lots of times as did the KEF dealer that Alvincastro posted. Never tru... | |
| KEF Blade 2 You can mount a tweeter in the air and open its back......many people do this and also do this with compression drivers. Nothing new. I have been doing this to a Vifa tweeter for 22 years. The backwave cancellation/absorption on the Kef is for the... | |
| KEF Blade 2 Your dealer is making things up if he says the Meta technology will make a speaker play lower and with more authority. The Meta thang is just a tweeter rear wave absorber that lowers the distortion of the tweeter......It has nothing to do with the... | |
| KEF Blade 2 I just thought of something cool. Kef has three levels of execution. If you look at the xover parts, wiring and jacks from the Kef LS50, the Kef Reference and the Blade series you will see three different levels of execution. This is why a stock r... | |
| Audible illusions Slow customer service I worked for this character years ago when he was still in Pleasanton, CA (mid 80s....almost 40 years ago). He would tell a dealer if they paid cash in advance they would get preamps right away.......months and months later.....he still had not sh... | |
| KEF Blade 2 My friend had Kef Blade 2s and now is using brand new built Apogee Duetta speakers....that were built by someone in England.....they were about $15K delivered. There is only a few parts from an original pair in the build....new ribbons, new frame ... |