rauliruegas
Responses from rauliruegas
| Uni-Protractor Set tonearm alignment Dear T_bone: Yes, I'm using the VE comparator IEC and DIN too for a fixed pivot to spindle distance.IMHO we need at least one calculation data that be the same on all and any calculations, this data is: 231.5mm pivot to spindle that's is what stat... | |
| Who needs a MM cartridge type when we have MC? Dear Acman3: Now with a few more listening hours which are your experiences between that TK3 and the 20SS stylus? what could we wait when listening to that combinations?, thank you in advance.Regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment T_bone: because the last link using the FR numbers with the offset angle you states still shows different distortions numbers to the ones you posted.Why is this?, I assume you have the answer. Thank you.regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear T-bone: According with Nandric those FR numbers comes from: 1984 German Magazine 'Das Ohr' that I can't find it on the net to read how comes the numbers.IBtw, I'm still waiting what I ask you before. Thank you.Regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear T_bone: Re-reading your post I found out those offset angles: 20.325/20.574 that I don't take in count ( I use the ones that gives the " natural " calculations, not forced ones. ) due that I use the VE calculator instead the comparator tool.B... | |
| Uni-Protractor Set tonearm alignment Or the links for your calculations if are different from the VE tools.Thank you again.Raul. | |
| Uni-Protractor Set tonearm alignment Dear T_bone: I'm confuse about your numbers.In this link there is the calculations with graphics for 245mm EL:www.vinylengine.com/tonearm_alignment_calculator.php?mv=&l=e&ev=245&i=i&c1=60.325&o=i&c2=&cal=1&submit=ca... | |
| Who needs a MM cartridge type when we have MC? Dear three of you: Thank you for each one answer.Acman3, I will post when I have on hand the Signet cartridge: I don't have it yet.regards and enjoy the music,raul. | |
| A Copernican View of the Turntable System Dear Dgob: What we hear at home through our each one audio system is what microphones " heard " and that are way near the " stage/venues " that our seat position in the music hall.In the other side the " micros " are not only sensitive but with wi... | |
| Uni-Protractor Set tonearm alignment Dear Dertonarm: Please show the graphics where any one can attest what you are writing.Taking " your " numbers ( I'm not against your approach or your numbers, I'm only questioning your statement of lower overall distortions over Löfgren A/Baerwal... | |
| Uni-Protractor Set tonearm alignment Dear Dertonarm: The original FR manufacturer numbers are totally wrong, these people IMHO wants only that the numbers appears in easy way for the customers but with out real care on the accuracy to Stevenson IEC solution and with no care on distor... | |
| Uni-Protractor Set tonearm alignment Btw, the maximum distortion on Baerwald is 0.598 with an average one 0.390. These figures are lower than the Stevenson ones you are using by around 23% lower.Regards and enjoy the music,raul. | |
| Uni-Protractor Set tonearm alignment Halcro: you said that you was using 230mm pivot to spindle on Baerwald and this is for a 246.736mm on EL that is diffferent from the 245mm manufacturer number and that gives you different overhang and offset angle.Anyway if we/you want to compare ... | |
| Uni-Protractor Set tonearm alignment Halcro, of course that you have to re-set the VTA/SRA and Azymuth for the new geometry set up. Sorry to take your time but things could be that you could like the Löfgren/Baerwald geometry. We don't know yet.regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear Halcro: The FR64 manufacturer numbers are for Stevenson IEC geometry set up ( and Mr. Ikeda don't take the exact Stevenson parameters but only an aproximation: he put for example 15mm on overhang instead the calculated number: 14.91mm. he did... |