rauliruegas
Responses from rauliruegas
| A Copernican View of the Turntable System Dear Dgob: What we hear at home through our each one audio system is what microphones " heard " and that are way near the " stage/venues " that our seat position in the music hall.In the other side the " micros " are not only sensitive but with wi... | |
| Uni-Protractor Set tonearm alignment Dear Dertonarm: Please show the graphics where any one can attest what you are writing.Taking " your " numbers ( I'm not against your approach or your numbers, I'm only questioning your statement of lower overall distortions over Löfgren A/Baerwal... | |
| Uni-Protractor Set tonearm alignment Dear Dertonarm: The original FR manufacturer numbers are totally wrong, these people IMHO wants only that the numbers appears in easy way for the customers but with out real care on the accuracy to Stevenson IEC solution and with no care on distor... | |
| Uni-Protractor Set tonearm alignment Btw, the maximum distortion on Baerwald is 0.598 with an average one 0.390. These figures are lower than the Stevenson ones you are using by around 23% lower.Regards and enjoy the music,raul. | |
| Uni-Protractor Set tonearm alignment Halcro: you said that you was using 230mm pivot to spindle on Baerwald and this is for a 246.736mm on EL that is diffferent from the 245mm manufacturer number and that gives you different overhang and offset angle.Anyway if we/you want to compare ... | |
| Uni-Protractor Set tonearm alignment Halcro, of course that you have to re-set the VTA/SRA and Azymuth for the new geometry set up. Sorry to take your time but things could be that you could like the Löfgren/Baerwald geometry. We don't know yet.regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear Halcro: The FR64 manufacturer numbers are for Stevenson IEC geometry set up ( and Mr. Ikeda don't take the exact Stevenson parameters but only an aproximation: he put for example 15mm on overhang instead the calculated number: 14.91mm. he did... | |
| Uni-Protractor Set tonearm alignment Dear T_bone: The Exel spreadsheet is very good idea.About an increment on the EL the " land " you have to move is limited by the headshell slots and is posible that 3-4 mm makes no diffrence that you can hear.If these kind of changes on the geomet... | |
| Uni-Protractor Set tonearm alignment Of course that to make comparisons the effective length must be the same because if we increment ( any increment, it does not matters how tiny. ) the EL distortions figures goes lower, the same happen when we increment the most inner groove distan... | |
| Who needs a MM cartridge type when we have MC? Dear Timeltel: +++++ " washer removed, clarity and definition at the extremes (as Raul notes) is improved, seperation and soundstage also. A TK7LCa on a vintage Nagoaka 8.5gm headshell (2.5mm, alu.) drifts towards the analytic... " +++++after this... | |
| Who needs a MM cartridge type when we have MC? Dear Acman3: And already did it the other way around?, I mean the Signet stylus in the AT 20SS cartridge.My Signet will comes with the SU ( 3 ) original stylus and with a mint original 2 ( elipthical. ) stylus. We will see how compares in between ... | |
| Uni-Protractor Set tonearm alignment Dear friends: IMHO any manufacturer protractor with multiple set up alternatives, like the DT protractor, should/could gives his customers the chart with the different distortions level with each set up geometry/template for the set up.IMHO we cus... | |
| Uni-Protractor Set tonearm alignment Dear friends: I think that is important to remember that what I'm talking over the thread and IMHO over those white papers outside is to align the cartridge stylus/cantilever where the pivoted tonearm is only a tool and a " must " for do it. From ... | |
| Uni-Protractor Set tonearm alignment Dear T_bone: Of course that we always can change the EL and I posted we can.On the other subject and due that's so simple through the different VE calculators ( thank you VE! ) when you or any owner of the DT protractor have it on hand you can tak... | |
| Uni-Protractor Set tonearm alignment Dear T_bone: I forgot: +++++ " It appears we agree on that point (that using a different alignment than mfr.'s original design could alter resonance characteristics). " +++++no and I can't say for sure if tha's happen till I have on " hand " white... |